Difference between K20 and K24 ?

[euroP]

does anyone know the difference length of the block between a k20 and k24...please help
i havea k20 motor in my car and i wanted to put a k24 header in there
will that work?

[superx]

if you get a JDM header....such as Toda, Mugen or Maximwork. I am sure it will fit on your K20A2 engine.

[euroP]

i am sure it will, but the is $$$$$$....so my question is would the tsx on work? there are both k motors, so i am sure it will bolt up, but wah about the length

[etonek]

http://hondata.com/tuning_the_tsx.html

The information you're looking for might be here.

[06tsx]

wow... i've never noticed that on hondata's website.

[euroP]

after reaading the hondata section it says that the euroR Toda header will fit. so i think i am ok then if i buy the comptech header and put it on my euroR....i hope it will work....becasue i just order it....thanks for the info ppl

[RBC_K24]

Originally Posted by euroP

does anyone know the difference length of the block between a k20 and k24...please help
i havea k20 motor in my car and i wanted to put a k24 header in there
will that work?

There is the different for K20a (JDM) and K24a2 (USDM) header:

1, k20a jdm header dont have O2 senor on down pipe, but K24a2 USDM has O2 senser on down pipe

2, K20a jdm header has 2 bolt flage, and k24a2 USDM header has 3 bolts flage

[RaCeR4LiFe022]

Originally Posted by RBC_K24

There is the different for K20a (JDM) and K24a2 (USDM) header:

1, k20a jdm header dont have O2 senor on down pipe, but K24a2 USDM has O2 senser on down pipe

2, K20a jdm header has 2 bolt flage, and k24a2 USDM header has 3 bolts flage

ughh ohhh.. that cant be good if you already bought that header... well if anything goes wrong im lookin for one

[euroP]

isnt the newer ones 3 bolt and the 04-05 model 2 bolt on the header?

[RaCeR4LiFe022]

doubt it... because ive only seen headers 04-07 no other way.

[euroP]

i jus order a tsx flange so now when i do my custom exhaust i know it will work.....ahahhaa....thanks guys for the info....appreciated

[superx]

okay! here its the break down of JDM Euro-R and CL9
CL7R

JDM CL9

[euroP]

i know they will bolt up to the engine no problem.....its just the attachment to the echaust system is the problem...also i dnt know if the tsx header is taller...and how much taller

[RBC_K24]

Originally Posted by euroP

i know they will bolt up to the engine no problem.....its just the attachment to the echaust system is the problem...also i dnt know if the tsx header is taller...and how much taller

K24a2 is 10mm taller than k20a

[euroP]

so there is not that much of a difference....i will see what happens when i put it on the car...thanks for the info