|
|
Welcome to TSXClub.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join TSXClub.com today!
|
06-20-2004, 12:58 PM
|
#1 (permalink)
|
|
mymothercountry
My Ride: CGP/6MT/NAVI/EBONY
|
badgeless TSX
does anyone tried to remove badges on the car yet? if so, how did you do it? what do i need to watch out for? and also when you removed it, did you have holes?
thanks
|
|
|
06-20-2004, 01:10 PM
|
#2 (permalink)
|
 Ex-Administrator Emeritus
Location: Huntington Beach, CA
My Ride: Honda S2000 2005
|
The H, or in our case A may be attached by two rivets. I'll have to look into it.
The other badges are held on by two sided tape. You can remove them with dental floss, and cleaner wax (to remover the left over glue from the tape).
I did this on my Civic Si, and it looked nice and clean. I have been thinking of doing the same on my TSX, but have for now left the badges on.
|
|
|
06-20-2004, 01:14 PM
|
#3 (permalink)
|
|
mymothercountry
My Ride: CGP/6MT/NAVI/EBONY
|
it's an A ... i wish it was JDM...but thanks for the advice...i just don't want to start and than end it up w/ holes in the trunk...cuz i don't like that whole idea of priming and painting over...but thanks
|
|
|
06-20-2004, 01:17 PM
|
#4 (permalink)
|
 Ex-Administrator Emeritus
Location: Huntington Beach, CA
My Ride: Honda S2000 2005
|
The "Acura", and "TSX" badges can be removed as stated.. But the "A" will leave you with two holes.
|
|
|
06-20-2004, 01:18 PM
|
#5 (permalink)
|
|
mymothercountry
My Ride: CGP/6MT/NAVI/EBONY
|
i c thanks Joker
|
|
|
06-20-2004, 02:34 PM
|
#6 (permalink)
|
 Ex-Moderator Emeritus
My Ride: TSX '04 CG/Ebony 5AT Nav
|
Quote:
|
Originally Posted by Joker
The H, or in our case A may be attached by two rivets. I'll have to look into it.
The other badges are held on by two sided tape. You can remove them with dental floss, and cleaner wax (to remover the left over glue from the tape).....
|
Yes -- oddly, that seems to be the way to do it.
Although I think the badges on the TSX are 
|
|
|
06-20-2004, 02:41 PM
|
#7 (permalink)
|
|
Registered Member
|
I'm just curious as to what the attraction is in removing badges? Is it for a smoother look, or just to be different?
A long time ago a badgeless car to me meant it was repainted & the emblems were left off. I know that's not the case these days.
|
|
|
06-20-2004, 02:44 PM
|
#8 (permalink)
|
 Ex-Administrator Emeritus
Location: Huntington Beach, CA
My Ride: Honda S2000 2005
|
All the badges give the rear of the car a clustered look. I am undecided about the TSX, so for now have left them on.
But with my Si, it looked much more clean (smooth) without the two badges (Civic, and Si).
|
|
|
06-20-2004, 03:20 PM
|
#9 (permalink)
|
 Ex-Moderator Emeritus
My Ride: 00 integra,04 tsx
|
Gives it a cleaner look. I'm takingmine off once I get off my ass to do it.
__________________
Do me a favor. From now on don't care what other people think about your car. Do what YOU want to your car. Who gives a damn what other people think about it.
|
|
|
06-20-2004, 03:57 PM
|
#10 (permalink)
|
|
mymothercountry
My Ride: CGP/6MT/NAVI/EBONY
|
yeah! definately a clean/nice look
|
|
|
06-20-2004, 05:42 PM
|
#11 (permalink)
|
 Ex-Moderator Emeritus
My Ride: TSX '04 CG/Ebony 5AT Nav
|
Yes, maybe, but.....don't you think "TSX" is beautiful? I'm serious.
The letters, the logo, just the basic idea, everything.
|
|
|
06-28-2004, 10:27 AM
|
#12 (permalink)
|
|
Registered Member
|
Quote:
|
Originally Posted by Joker
The "Acura", and "TSX" badges can be removed as stated.. But the "A" will leave you with two holes.
|
Put an "H" over it and get Accord logo as well. This will confuse the lame people. While it is infact an Accord, a true Accord.
|
|
|
06-30-2004, 08:51 PM
|
#13 (permalink)
|
 Ex-Administrator Emeritus
Location: 33.87°S 151.21°E
My Ride: TOTM November 04 ホンダ CL9 アコード B-92P
|
The front grille assembly is different for the Acura and Honda emblem. You'll need toe Honda grille assembly if you want a Honda emblem instead of an Acura emblem. Vice-versa.
Rear is the same, while the rest of the emblems can be easily sourced outside of the North Americas region.
|
|
|
07-08-2004, 05:45 PM
|
#14 (permalink)
|
|
owned ur ass
|
Has anyone ever seen any pictures of a tsx without emblems??? if so please post them, id like to see how it looks
__________________
Hondata Reflash
Injen CAI
DC Header
High-Flow Cat
Comptech Exhuast
Eibach Prokit
Koni Yellow Struts
Comptech Rear Sway Bar
19" Ron Jon Inpyres
225/35/19 Fuzion ZRI
5% Charcoal Tint
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -4. The time now is 04:35 AM.
|