Forums Register Go Premium FAQ Members List vBGarage Mark Forums Read


Go Back   TSXClub.com Forums > Performance > Wheels & Alignment > 1st Gen - Wheels, ...
Reload this Page Another wheel spacer question

Welcome to TSXClub.com!
Welcome to TSXClub.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join TSXClub.com today!


Reply
Page 2 of 2 < 1 2
 
LinkBack Thread Tools Display Modes
Old 08-27-2009, 10:12 PM   #16 (permalink)
Evan
 
evan42781's Avatar
 
Join Date: Oct 2006
Location: Birmingham(School)/Atlanta(Home)
My Ride: Acura/TSX/2006
Posts: 926
evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.
iTrader: (0)
bump on what someone thinks about my above post^^^
__________________
06' Nighthawk Black Acura TSX
--15% Tints front and back --Fog lights rewired --HID Conversion Fogs 6000k --6000k Headlights
--V1 mounted next to rear mirror -- Custom Made ICEBOX with K&N Filter --Tanabe DF210 and Koni Yellows --Progress Rear Sway Bar --Ingalls Rear Camber Kit --Painted Front Grill --Smoked Tailights and Reflectors --Red JDM Valve Cover --Apexi Exhaust --Buddy Club Racing Condenser --JDM Replica Headlights --Blacked out Window Trim and Handles --White LED's throughout interior --Drilled and slotted front rotors --Hondata --Spoon Replica Spoiler --Powder-Coated 05 TSX rims --Throttle body bypass --P2R Intake Manifold Gasket --NST Red Pulleys --Racing Brake Stainless Steel Lines

Mods to Hopefully Come
--Headers 4-2-1 --15mm Wheel Spacers --Body Kit
evan42781 is offline   Reply With Quote
Old 08-29-2009, 12:22 PM   #17 (permalink)
Registered Member
 
Join Date: Sep 2007
Location: cenCal
My Ride: acura/tsx/2004
Posts: 216
luder917 is neutral and has a clean balanced record.
iTrader: (6)
Quote:
Originally Posted by evan42781 View Post

this should be exactly what i need (minus the rings). Looks like a good price cause they come in pairs and i should just get 2 sets for 240$ ?? Sounds good?
you could get the exact same part with built in hub center bores from ichiba for 125 from a vendor on the other site. i think project kic charges extra for them. pm me if you need a link.
__________________
18*8+30 225 40 18 (now with 15mm spacer in the rear)
are you sure they dont fit???
http://www.tsxclub.com/forums/showth...316#post400316
+22 coming soon...
luder917 is offline   Reply With Quote
Old 09-01-2009, 03:04 PM   #18 (permalink)
Evan
 
evan42781's Avatar
 
Join Date: Oct 2006
Location: Birmingham(School)/Atlanta(Home)
My Ride: Acura/TSX/2006
Posts: 926
evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.evan42781 has a spectacular aura and a relevant respect from many.
iTrader: (0)
^^ ok so that guy wont respond to anything...no clue whats up. So i guess im going to keep lookin around.
__________________
06' Nighthawk Black Acura TSX
--15% Tints front and back --Fog lights rewired --HID Conversion Fogs 6000k --6000k Headlights
--V1 mounted next to rear mirror -- Custom Made ICEBOX with K&N Filter --Tanabe DF210 and Koni Yellows --Progress Rear Sway Bar --Ingalls Rear Camber Kit --Painted Front Grill --Smoked Tailights and Reflectors --Red JDM Valve Cover --Apexi Exhaust --Buddy Club Racing Condenser --JDM Replica Headlights --Blacked out Window Trim and Handles --White LED's throughout interior --Drilled and slotted front rotors --Hondata --Spoon Replica Spoiler --Powder-Coated 05 TSX rims --Throttle body bypass --P2R Intake Manifold Gasket --NST Red Pulleys --Racing Brake Stainless Steel Lines

Mods to Hopefully Come
--Headers 4-2-1 --15mm Wheel Spacers --Body Kit
evan42781 is offline   Reply With Quote
Old 11-11-2009, 10:10 PM   #19 (permalink)
Registered Member
 
Join Date: Feb 2009
My Ride: TSX/05/Silver
Posts: 98
jazon is an unknown soldier, or on the road to either parallels.
iTrader: (2)
Verrry interested to see where this project is at, please pm me when you get a chance
jazon is offline   Reply With Quote
Old 11-12-2009, 01:32 PM   #20 (permalink)
Registered Member
 
EuroRspec's Avatar
 
Join Date: Aug 2008
Location: SF, CA
My Ride: 96 Accord
Posts: 1,703
EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.
iTrader: (2)
Quote:
Originally Posted by evan42781 View Post
just found this on Ebay!!

PROJECT KICS WIDE THREAD SPACER 15MM 5X114 HONDA MAZDA:eBay Motors (item 310125192411 end time Sep-22-09 20:21:00 PDT)

this should be exactly what i need (minus the rings). Looks like a good price cause they come in pairs and i should just get 2 sets for 240$ ?? Sounds good?
I looked into it and you can run the 15mm spacers, I measured the spacing in tha back of the rim in between the lug holes. and it's more than 8mm deep.

$240 for all 4 sounds very good, but you will need hub rings.

Go with Ichiba V2 they cost the same and have hub rings.
__________________
Suspension install and other nick nacks
http://tsxclub.com/forums/south-west...on-brakes.html
DIY: Suspension Install
http://tsxclub.com/forums/south-west...on-brakes.html
EuroRspec is offline   Reply With Quote
Old 11-14-2009, 08:11 PM   #21 (permalink)
Registered Member
 
04pwptehsex's Avatar
 
Join Date: Apr 2008
Location: Dec. Al
My Ride: 04 pwp tsx w. 06+ navi
Posts: 1,734
04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.
iTrader: (0)
i have 17x7 in i believe a +38 or +40 offset i cant remember but what size spacer would i need to get to be flush with the fender im dumped all the way on tein basics and also have a camber kit the tires are also 215/40/17, i dont mind running camber at all as long as my toe is in spec
__________________
interior-06 navi conversion | giga squash|full led conversion | wink mirror | jdm honda fit coin holder | accord key fob
exterior-aspec front lip | 08 accord rearview camera | jdm grill w pwp trim| re-badged | 40% windshield | m3 spoiler | mugen license plate bolts |carbon m3 roof spoiler | yakima bike rack | trim black out
lighting- led tag lights | led reverse lights | led trunk light
engine-knock off bc spec II exhaust | topspeed header | battery tucked behind front bumper w/ jumper terminals in fog bezel | black im cover|black dipstick|tb coolant bypass|sri | t1r purple billet oil cap | polished dress up washers and silver bolts | hood dampers | pwp sparkplug cover | t1r resivor covers | buddy club radiator cap | small engine harness tuck
chasis-18" bbs rk | tein basics | camber kit | r1 drilled and slotted rotors | eibach rsb | rear lower tie-bar
04pwptehsex is offline   Reply With Quote
Old 11-15-2009, 01:22 AM   #22 (permalink)
Registered Member
 
EuroRspec's Avatar
 
Join Date: Aug 2008
Location: SF, CA
My Ride: 96 Accord
Posts: 1,703
EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.EuroRspec is on the distinguished road to high status recognition.
iTrader: (2)
^ I would run 5mm.
__________________
Suspension install and other nick nacks
http://tsxclub.com/forums/south-west...on-brakes.html
DIY: Suspension Install
http://tsxclub.com/forums/south-west...on-brakes.html
EuroRspec is offline   Reply With Quote
Old 11-15-2009, 09:42 AM   #23 (permalink)
*Metalhead*
 
1TSXer's Avatar
 
Join Date: Oct 2004
Location: TEXAS
My Ride: 2004 CGP TSX 6SPD & 2010 CBP RDX
Posts: 1,962
1TSXer is either technically knowledgeable, or well loved.1TSXer is either technically knowledgeable, or well loved.1TSXer is either technically knowledgeable, or well loved.1TSXer is either technically knowledgeable, or well loved.1TSXer is either technically knowledgeable, or well loved.1TSXer is either technically knowledgeable, or well loved.
iTrader: (4)
Quote:
Originally Posted by EuroRspec View Post
^ I would run 5mm.
^+1 and if you really wanted to you could do 10mm in the rear.
__________________
04 CGP 6spd MT
ENGINE: Hondata Reflash, CT-E Header, RT high flow cat, Apexi WS2 Exhaust, Comptech Ice Box, UR Pulley Kit, P2R TB Spacer/Gaskets, Hondata I.M. Gasket, Mugen oil cap, Mugen Radiator Cap, Mugen Resevoir covers, Mugen Thermo-Switch, T1R Radiator Hoses, JDM Honda Valve cover/Plug cover, Buddy Club Voltage Stabilizer/Grounding Kit,
SUSPENSION: Neuspeed/Koni Shocks, Neuspeed Sport Springs, Neuspeed Front Upper Strut Bar, Cusco Type1 Brace, Progress RSB, Ingalls Camber/Toe Kit
WHEELS/TIRES: Work XT7 wmb finish F/18x7.5+48, R/18x8.5+46 Hankook Ventus V12 EVO 225&235/40 2nd set:Mugen GP 18x7.5 +48 w/15mm spacers w/Hankook Ventus V12 EVO, Project Kics R40 Neo Chro Lugs
BRAKES: Axxis Ultimates Pads F&R, Powerslot Rotors, Stoptech SS Brake Lines
INTERIOR: Comptech Short Shifter, Skunk2 Shift Knob, CorSport shifter bushings, Ultimate Pedals Custom Gas/Brake/Clutch Pedals, Luminar Tint, USA Spec iPod Module, Blue LED footwell lighting
EXTERIOR: Honda 04 JDM Headlights w/Philips 85122CM 5000K bulbs, Mugen Grill, Mugen Ventilated Visors, Acura A-Spec Lip Kit, OEM Fog Lights w/3000K HID Conversion Kit, OEM 07 TSX tail lights, CGP M3 Rear Lip Spoiler
1TSXer is offline   Reply With Quote
Old 11-15-2009, 04:43 PM   #24 (permalink)
Registered Member
 
04pwptehsex's Avatar
 
Join Date: Apr 2008
Location: Dec. Al
My Ride: 04 pwp tsx w. 06+ navi
Posts: 1,734
04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.04pwptehsex has a spectacular aura and a relevant respect from many.
iTrader: (0)
yea i was going to say that the rear needed more i figured it would be 5/10 but i wanted to make sure , i think we hav some spacers laying around the shop so ill check it out just been having a lack of time
__________________
interior-06 navi conversion | giga squash|full led conversion | wink mirror | jdm honda fit coin holder | accord key fob
exterior-aspec front lip | 08 accord rearview camera | jdm grill w pwp trim| re-badged | 40% windshield | m3 spoiler | mugen license plate bolts |carbon m3 roof spoiler | yakima bike rack | trim black out
lighting- led tag lights | led reverse lights | led trunk light
engine-knock off bc spec II exhaust | topspeed header | battery tucked behind front bumper w/ jumper terminals in fog bezel | black im cover|black dipstick|tb coolant bypass|sri | t1r purple billet oil cap | polished dress up washers and silver bolts | hood dampers | pwp sparkplug cover | t1r resivor covers | buddy club radiator cap | small engine harness tuck
chasis-18" bbs rk | tein basics | camber kit | r1 drilled and slotted rotors | eibach rsb | rear lower tie-bar
04pwptehsex is offline   Reply With Quote
Reply
Page 2 of 2 < 1 2

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

CarNews.NET your car news portal

All times are GMT -4. The time now is 04:54 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0 RC2
vB.Sponsors 		Contact Us - TSXClub.com - Archive - Privacy Statement - Top