Forums Register Go Premium FAQ Members List vBGarage Mark Forums Read


Go Back   TSXClub.com Forums > Performance > Aerodynamics > 2nd Gen - Aerodynamics
Reload this Page roof wing anyone?

Welcome to TSXClub.com!
Welcome to TSXClub.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join TSXClub.com today!


Reply
Page 2 of 4 < 1 2 34 >
 
LinkBack Thread Tools Display Modes
Old 10-01-2008, 05:31 PM   #16 (permalink)
iVTEC no koe
 
HoRRo's Avatar
 
Join Date: Oct 2005
Location: Toronto, Canada
My Ride: Acura/TSX/2005
Posts: 1,533
HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.
iTrader: (0)
Quote:
Originally Posted by Darren View Post
Can't really find any that style. I only searched for about 2 mins though.
I searched for: m5 e60 roof spoiler

and found a bunch.
__________________
My car is stock, I promise.
HoRRo is offline   Reply With Quote
Old 10-01-2008, 05:32 PM   #17 (permalink)
iVTEC no koe
 
HoRRo's Avatar
 
Join Date: Oct 2005
Location: Toronto, Canada
My Ride: Acura/TSX/2005
Posts: 1,533
HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.
iTrader: (0)
Quote:
Originally Posted by ex-rotary owner View Post
yes, i will be using it alongside the oem lip spoiler.
Whenever you get a chance, can you measure how wide the indent in the middle is?

Thanks in advance.
__________________
My car is stock, I promise.
HoRRo is offline   Reply With Quote
Old 10-01-2008, 06:16 PM   #18 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)
I'll do that on Friday when I get the roofwing installed. The indent is there because that's where the E60 has its third brake light.
ex-rotary owner is offline   Reply With Quote
Old 10-01-2008, 08:18 PM   #19 (permalink)
iVTEC no koe
 
HoRRo's Avatar
 
Join Date: Oct 2005
Location: Toronto, Canada
My Ride: Acura/TSX/2005
Posts: 1,533
HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.
iTrader: (0)
Quote:
Originally Posted by ex-rotary owner View Post
I'll do that on Friday when I get the roofwing installed. The indent is there because that's where the E60 has its third brake light.
Great, thanks. If it's not too much trouble, could you also measure the height of the spoiler where the indent is.

I'm hoping it will line up with my brake light.
__________________
My car is stock, I promise.
HoRRo is offline   Reply With Quote
Old 10-01-2008, 08:29 PM   #20 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)
ill just measure the whole roofwing plus the indent in the middle. sounds good?
ex-rotary owner is offline   Reply With Quote
Old 10-01-2008, 08:48 PM   #21 (permalink)
iVTEC no koe
 
HoRRo's Avatar
 
Join Date: Oct 2005
Location: Toronto, Canada
My Ride: Acura/TSX/2005
Posts: 1,533
HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.
iTrader: (0)
Quote:
Originally Posted by ex-rotary owner View Post
ill just measure the whole roofwing plus the indent in the middle. sounds good?
Sounds amazing, thanks!
__________________
My car is stock, I promise.
HoRRo is offline   Reply With Quote
Old 10-02-2008, 01:45 AM   #22 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)
the roof wing measure 44 1/2 inches for left to right.
approximately 3 inches from top to bottom.
from the top of the wing to the top of the indent is 2 inches.
the indent itself measure 13.5 inches from left of the indent to right of the indent.
from the top of the indent to the bottom of the indent is approximately an inch.
here are more photos. (excuse the mess in my room)
ex-rotary owner is offline   Reply With Quote
Old 10-02-2008, 03:55 PM   #23 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)
I got it installed this morning. Will take pictures of it later tonight when I take the tape off. It wasnt expensive at all. 40 dollars install. Materials used were 3M doubleside tape, and windshield specific silicone glue (its the stuff window installers use to glue windshield in place, its stronger than normal silicone glue)
ex-rotary owner is offline   Reply With Quote
Old 10-02-2008, 04:20 PM   #24 (permalink)
iVTEC no koe
 
HoRRo's Avatar
 
Join Date: Oct 2005
Location: Toronto, Canada
My Ride: Acura/TSX/2005
Posts: 1,533
HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.HoRRo is on the distinguished road to high status recognition.
iTrader: (0)
Quote:
Originally Posted by ex-rotary owner View Post
the roof wing measure 44 1/2 inches for left to right.
approximately 3 inches from top to bottom.
from the top of the wing to the top of the indent is 2 inches.
the indent itself measure 13.5 inches from left of the indent to right of the indent.
from the top of the indent to the bottom of the indent is approximately an inch.
here are more photos.

Thanks a lot man! Can't wait to see pics of it on your car.
__________________
My car is stock, I promise.
HoRRo is offline   Reply With Quote
Old 10-03-2008, 01:04 AM   #25 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)



ex-rotary owner is offline   Reply With Quote
Old 10-03-2008, 01:48 AM   #26 (permalink)
hoplessly addicted to JDM
 
MMsTSX's Avatar
 
Join Date: Dec 2007
Location: Arizona Bay
My Ride: 08 CGP Quartz AT Navi CL9
Posts: 1,647
MMsTSX , with enough acceptance, will soon become famous.MMsTSX , with enough acceptance, will soon become famous.
iTrader: (4)
fit looks good

__________________
a new look for every day of the week now
MMsTSX is offline   Reply With Quote
Old 10-03-2008, 05:26 AM   #27 (permalink)
- JDM TSX -
 
Darkside TSX's Avatar
 
Join Date: Aug 2008
Location: Queens, New york
My Ride: 05 MSM TSX
Posts: 1,622
Darkside TSX is either technically knowledgeable, or well loved.Darkside TSX is either technically knowledgeable, or well loved.Darkside TSX is either technically knowledgeable, or well loved.Darkside TSX is either technically knowledgeable, or well loved.Darkside TSX is either technically knowledgeable, or well loved.Darkside TSX is either technically knowledgeable, or well loved.
iTrader: (1)
looks sick ..to bad they dont have one for first gens =/
__________________
TriStateJDM

Anyone thats in the tristate please join !!
Darkside TSX is offline   Reply With Quote
Old 10-03-2008, 12:56 PM   #28 (permalink)
Registered Member
 
Join Date: Jun 2008
My Ride: 2009 Polished Metal TSX
Posts: 411
ex-rotary owner is neutral and has a clean balanced record.
iTrader: (0)
I am starting to wonder if the current 3 series roof wing or the E39 5 series roof wing will fit the 1st gen.
ex-rotary owner is offline   Reply With Quote
Old 10-03-2008, 02:11 PM   #29 (permalink)
Registered Member
 
Darren's Avatar
 
Join Date: Jun 2008
Location: Charlotte, NC
My Ride: 2009 Acura TSX
Posts: 394
Darren , with enough acceptance, will soon become famous.Darren , with enough acceptance, will soon become famous.Darren , with enough acceptance, will soon become famous.
iTrader: (0)
I actually like the groove for what would be the 3rd brake light on the E60. Gives it some depth and allows it to stick out a bit and be a little more noticable.

I might have to copy you someday and get one of these.
__________________
'09 CBP TSX Premium AT
Aero Sport Kit, Paintmatched Front Grill, Rear Decklid Spoiler, 19"x8" Liquid Silver RonJon Legends, 245/35 Falken FK-452, Rotora Front Big Brake Kit, Eibach Pro-Kit, Project KICs R26 Black Chrome Lugs, 35% Tint, Debadged Rear, Removed Intake Resonator
Darren is offline   Reply With Quote
Old 10-03-2008, 06:00 PM   #30 (permalink)
Registered Member
 
kennungesser's Avatar
 
Join Date: Oct 2005
Location: Lancaster Ohio
My Ride: 2000 Dodge Dakota 4.7 4x4 v8
Posts: 441
kennungesser has a spectacular aura and a relevant respect from many.kennungesser has a spectacular aura and a relevant respect from many.kennungesser has a spectacular aura and a relevant respect from many.
iTrader: (1)
Yeah, if it would fit first gen, I'd be all over this!! Someone wanna bite the bullet?
kennungesser is offline   Reply With Quote
Reply
Page 2 of 4 < 1 2 34 >

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

CarNews.NET your car news portal

All times are GMT -4. The time now is 05:30 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0 RC2
vB.Sponsors 		Contact Us - TSXClub.com - Archive - Privacy Statement - Top