J's Racing Intake *UPDATED* CF INTAKE

[AJR-COW]

Hey Everyone,

I have a couple of these in stock now..

This is a limited time offer and only limited to 3 intakes..

Price: 795 CDN aprox. 795 USD Shipped.

http://www.aj-racing.com/ajpwr/CL7W/CL7intake.jpg

http://www.aj-racing.com/catalog/files/d_2051.jpg

http://www.aj-racing.com/ajpwr/CL7W/CL7intake-1.jpg

http://www.aj-racing.com/ajpwr/CL7W/CL7intake-2.jpg

http://www.aj-racing.com/ajpwr/CL7W/CL7intake-3.jpg

http://www.aj-racing.com/catalog/files/d_2060.jpg

http://www.aj-racing.com/catalog/files/d_2061.jpg




Thanks

Calvin

[VorteC]

!!! big news! WOW!!
too bad i'm not a baller enough to buy it!

[Bender Unit]

:woowoo: What a breaking news :)

[Benz]

I can see Bender likes it!! hahaha....sell me ur Mugen!

[Zigen]

Only 2!! there will be a lot of ppl calling aj now...

[06tsx]

nice... just out of curiosity how much is it going for?

[daicacharco]

nice... just out of curiosity how much is it going for?


LIES !! TOTAL LIES !! YOU KNOW YOUR GETTING IT !! LOL

[AJR-COW]

There is no firm price on it yet. It will be Aprox. 700 CAD

[pcdawg]

Wow..cant wait to see how it looks like! Its cheaper than the mugen airbox!

[AJR-COW]

pics are up...didnt get a pic of it with the air box..I wil lget that soon. They are sending over 2 sets. The intake is not for sale yet. Once it is i will be taking orders.

Thanks

Calvin

[PJS]

SRI or CAI based?
Judging by the mention of 'box', one presumes the latter.

[AJR-COW]

It is a cold air. they have a duct for the air to come in at the front of the bumper. In a way its a differnt design. The air gets picked up infront of the car, where as a cold air intake the air comes from the bottom of the car. This intake has a similar design to the mugen one. Or if you guys have seen the J's intake for the s2000 its similar to that.


SRI or CAI based?
Judging by the mention of 'box', one presumes the latter.

[bernardtamhk]

Sorry, just to clarify ... is this CAI from J's Racing Japan for the Euro R?

[chuson]

Is the intake made out of carbon fibre or anything special? $700 is cheaper than Mugen but still.....

Anyone interest on my Injen CAI????

[chaRz]

great to hear. the only reason i thought there was no j's racing being made for the tsx was because i e-mailed someone at aj-racing and they told me there was no intake in production.. :P

[AJR-COW]

great to hear. the only reason i thought there was no j's racing being made for the tsx was because i e-mailed someone at aj-racing and they told me there was no intake in production.. :P


We were told by J's that it was under development for the longest time, someone here said that they emailed J's and was told there wasnt gonna be one made.

[AJR-COW]

Is the intake made out of carbon fibre or anything special? $700 is cheaper than Mugen but still.....

Anyone interest on my Injen CAI????


Its just FRP, if they made a carbon one it would cost even more:P

[wbenitez1128]

wow can't wait to get the specs on this intake! let us know more info as it comes calvin!

[06tsx]

LIES !! TOTAL LIES !! YOU KNOW YOUR GETTING IT !! LOL
haha nope not planning on

[06PWPssshh]

Im sure you guys are going to DYNO this...Interested to see what numbers it will make.

[AJR-COW]

Im sure you guys are going to DYNO this...Interested to see what numbers it will make.


From what i can tell you so far is the torque is much better the low end feels like there is more power, but than again i cant give you an exact number until we can get this on the Dyno.

Thanks

Calvin

[AJR-COW]

From what i was told from J's this intake is made for there race car, This intake is made for performace over looks:)

[xjohnkdoex]

is there a heat shield for this intake setup?

[JDM KeVioO]

im getting this no matter what.

[AJR-COW]

is there a heat shield for this intake setup?


yes there is. The pic dosent show it. Once we can take a pic of the heat shield i will post it up.

[CCColtsicehockey]

hmmm I was hoping for something like the carbon j's intakes for the 96-00 civics. oh well.

[chaRz]

dang, $695 USD.. same price as a gruppeM

[inkedup]

hmmm I was hoping for something like the carbon j's intakes for the 96-00 civics. oh well.

:sprint:


This intake definetly looks to be function over form, I like the idea of pulling the cold air from the front of the bumper but damn is the air box huge.

http://www.aj-racing.com/catalog/product.php?productid=1456&cat=128&page=1

[xjohnkdoex]

i can't afford this right now. but i'd definately like to see pics of the setup. that airbox looks like a monster compared to the comptech or mugen airboxes.

[Jiggaman]

isn't this design going to increase the chance of hydrolock?

[06PWPssshh]

I believe that's why they state that it's made for their race car. Performance A++++ 1blue1.gif
isn't this design going to increase the chance of hydrolock?

[AJR-COW]

isn't this design going to increase the chance of hydrolock?


No, Hydrolock will occur when liquid fills a cylinder on the intake stroke. Therefore even if its raining the amount of water it takes in is not gonna damage your engine. The chances of a CAI that picks up air from the bottom of the car has a MUCH bigger chance of hydrolock. You would need to be revving your engine with the whole filter under water for anything to happen. I live in vancouver and I have driven S2000 with that desgin of intake in a storm and its still fine. There is not alot to be worried about. I have also had a CAI on my car and driven in the stormy conditions and it was fine. IMO there is nothing to be worried about.

Thanks

Calvin

[gerardo]

ooooooo wow, more pics??

[enkay]

how does it sound??? hehe is it loud like a injen cai?

[Noel]

This would put down a better performance ratio vs. Mugen without a doubt. J's Racing may be late to the party, however they always have good reason to come up with a better R&D product in the end.

In parallel comparison, the J's Racing Tsuchinoko Chamber Intake for the AP1/2 is a higher rated product vs. Mugen on performance and price.

One of the key PROs of this product is improved torque from the large air intake chamber, and a consistent power delivery increase all the way to redline. This is in effect putting the best of CAI + SRI combined but not have the lack of low end torque from the CAI or the heat soak from the SRI. You also don't have the loud intake CAI suction noise that not all owners like.

[spoonfed]

NUTS!!
Looks like I might be putting up my CAI for sale soon.
Injen CAI MR Tech. in Black for an 06 to be more specific. :thumbsup:

[xjohnkdoex]

any pics to provide for this thing?

[Jiggaman]

this for sale yet?

[CCColtsicehockey]

This would put down a better performance ratio vs. Mugen without a doubt. J's Racing may be late to the party, however they always have good reason to come up with a better R&D product in the end.

In parallel comparison, the J's Racing Tsuchinoko Chamber Intake for the AP1/2 is a higher rated product vs. Mugen on performance and price.

One of the key PROs of this product is improved torque from the large air intake chamber, and a consistent power delivery increase all the way to redline. This is in effect putting the best of CAI + SRI combined but not have the lack of low end torque from the CAI or the heat soak from the SRI. You also don't have the loud intake CAI suction noise that not all owners like.
I have to say I dont know follow how this intake could be better at all really. I mean there is no tube directly airflow flow down behind the bumper up into through the to the filter. the mugen has a pipe to do this. I mean I think this is more efficent than the gruppe-m design but right now I think the mugen probably is still more efficent. There is only a panel blocking hot air from the engine. even the gruppe-m has a better heat shield design that meets with muliple spots on the engine bay to almost create a seal.

[chhimp]

Is this intake gonna be C.A.R.B legal for cali? Or is it in the process of being approved?

[AJR-COW]

Have some in stock...

[turoneatingpnoy]

Is this intake gonna be C.A.R.B legal for cali? Or is it in the process of being approved?

+ 1

[AJR-COW]

+ 1


I am not 100 positive but it should be CARB legal..

[06PWPssshh]

Installed :thumbsup:

[AJR-COW]

Sold Out..

[chhimp]

Installed :thumbsup:
when your smog check is due, can you tell us if it passes the mechanical and visual test? How does it sound?

[06PWPssshh]

when your smog check is due, can you tell us if it passes the mechanical and visual test? How does it sound?
Sounds good...VTECH finally sounds like what it should.. Actually sounds like a damn built B-Series to be honest with u..lol. As far as Visual and all that it really depends where u take it...Im not to worried about smog and all that as it's a new car so that wont come up for a few years. You can deffinetly feel the mid to top end difference. I'm still debating on putting on the GOLD baller J's badge on the intake.... It would just be a sign for cops to FCUK with you out here and send u to BAR just because they simply don't know what the heel they're looking at. :woot: :woot:

[Bender Unit]

You bought the FRP or CF one ?
Let see some pictures :D

[06PWPssshh]

You bought the FRP or CF one ?
Let see some pictures :D
1+1 weave= CF :ben:

[inkedup]

Let see some pictures :D

:sprint:

[06tsx]

in for pics!

[06PWPssshh]

I'll have some up when the rest of the parts are installed.. Probably gonna do a lil photo shoot this weekend. I'll have them up asap.

[enkay]

maad pics =D
wanna take a soundclip of your intake lol =P

[06PWPssshh]

sound clip...hmmmm.. I'm not sure your gonna be able to hear just the intake.

[gerardo]

sound clip...hmmmm.. I'm not sure your gonna be able to hear just the intake.
:sprint: sound clip please. but whats with the ridiculous price? >_<

[AJR-COW]

Special Price In Stock Now!