Replacing door speakers

[gigabyte]

Is it hard to rpl the door speakers? What size are the door speakers, tweeters? Taking off the door panels? Do you have to put spacers for the door speakers? Any info on hard it is or how long it will take is great...

[2.4DOHCiVTEC]

I think the door ones are 6.5"

The rears are 6 X 9.

[slo007]

Originally posted by gigabyte
Is it hard to rpl the door speakers? What size are the door speakers, tweeters? Taking off the door panels? Do you have to put spacers for the door speakers? Any info on hard it is or how long it will take is great...

It's not hard.

6.5 in doors, 6x9 in rear, 1 up front (tweeters)

Yes, you need spacers.

It takes about 30 minutes per door.

http://www.chrishorne.com/gallery/TSXspeakers

[hip]

I have set of speakers from an unfulfilled Ody project. These are MB Quart PSC216 = 6-1/2" round & PKC110 = 4" round.

Obviously the 4" aren't of any use, but I'm debating whether to do anything with the 6-1/2" as they are deep speakers @ 2.07"

I know that would have worked in the Ody but require spacers, probably the same for TSX?

Not sure I want to use these, maybe I'll put them up on old Ody site or just eBay them?

Any ideas?

[slo007]

Originally posted by hip
Obviously the 4" aren't of any use, but I'm debating whether to do anything with the 6-1/2" as they are deep speakers @ 2.07"


2.07" will work fine. Mine are 2.75" (required cutting): Apine Type R.

[hip]

Thanks slo007, are you satisfied with your sound now?

[slo007]

Thanks slo007, are you satisfied with your sound now?

No, I ended up replacing them for something else. The speakers were too metallic-sounding for my taste.