Injen Air Intake

[PROJECTSX]

HI everyone i took my car to INJEN TECHNOLOY last week and they R & D a new cold air intake system. i just got it back yesterday so only drove it a few miles. but i will have pics for you guys tommrow and i want to get everyone ready for a group buy as soon as the kit is avalible . and they also dyno the intake but to bad i have an auto tranny.:( (but i still like how it drives). INJEN does not have a release date yet.

[PROJECTSX]

here are some pics of the cold air intake system by injen

[PROJECTSX]

there it is

[PROJECTSX]

here is a view from behind the foglight cover

[accsuperstar]

swweeeeet! any idea on how much they plan on chargin? and any dynos to show performance gains?

[PROJECTSX]

i should have some prices today and i will put the dyno run when i get it from injen.

[Ray]

looks good maby I can set up a groupbuy on these ones they are out.

[PROJECTSX]

this kit is not out yet and no prices yet but i will keep you guys inform.

[PROJECTSX]

i am waiting for the dyno runs . i will post them up asap.

[Typeaccord]

Looks very nice. Are they planning on incorporating some kind of water bypass valve to prevent hydrolocking?

[PROJECTSX]

no need for that in cali and the valve only works if you were in 12 in of water

[Typeaccord]

Any updates?

[PROJECTSX]

ok i just got the dyno runs and it look great. no prices yet but about 2 weeks away for a group buy so get ready.

[PROJECTSX]

here it is

[Typeaccord]

Dyno looks promising! 11+hp is definitely welcome. Gain is throughout the powerband above 3k rpm which is good. Power loss below 3K rpm is evident, although minimal.

[PROJECTSX]

i am starting a list and dont you want to be one of the first . i dont have any pricing yet or time. i will keep you posted as soon as injen get me more info.

[seth livesey]

When can I get this intake, I have been looking for one for a while! Can youu feel a difference in the torque band?

[PROJECTSX]

i post the dyno print out on page one you feel the torque in the mid range. i pulls strong . i am still waiting on info from injen for release date and price. but i will let you know asap and as soon as it is avalible i will do a group buy.

[PROJECTSX]

just talked to injen . they said production started on the CAI and very soon we will get our hands on it.

[SRsilvia20DET]

stock tsx with cold air, revved to 7800+rpm? no additional fuel pressure required? is stock ecu and injectors compensating for the extra air?

[PROJECTSX]

yes yes and yes. well its stock now but i talked to some companies like hondata and they dont have any ecu upgrades. i will keep checking . i think the ecu and the injectors are made (the stock ones) to handle more air and adjust to that. the factory always give themselfs room to work with for more power.

[yehonatan]

how much hp thus it actually add? what benefits do I get?

[SRsilvia20DET]

I talked to Phillip at Ingen... he said the A/F read 13:1. So stock injectors and ecu are compensating well enough.... i wonder how much that will change with exhaust and ex manifold swap.

[Jrock]

This CAI looks cool, may have to get one.
But will it void the warranty?

[PROJECTSX]

i dont think so but to be on the safe side i would put the stock intake back on and them give it to the dealer.

[seth livesey]

Any news about the intake from injen?

[PROJECTSX]

i am waiting a e-mail from injen as soon as i hear something i will let you guys know and the kit is in production . a group buy will start asap so get ready.

[Ultra_TSX]

i have a custom cold air built at enginuity in san diego i also have custom 2.5 exhaust i will dyno soon to see if i have some gains but 11 sounds good i wanna test the injen vs the custom

[PROJECTSX]

is your s auto or 6 spd. i am going to do an exhaust in the near future but 2.5 in sounds abit to big .

[Jrock]

whats the stock size of the exhaust

[PROJECTSX]

i dont know for sure but usually 2in or smaller

[AcuraTSX03]

i was pretty sure that the stock size of the exhaust on the tsx was 3.5 in... i may be wrong though

[Jrock]

is 3.5 in the exhaust tubing? sounds like tip because 3.5 tubing would be huge

[seth livesey]

Injen CAI's should be at your local Acura dealer today or tomorrow. Price is close to 300.00 dollars. Acura is an authorized INJEN dealer so the prices should be fair. Your warranty will not void if they install it for you (even though CAI's are easy to install. I don't know the labor cost because know you has installed one yet!

[Ultra_TSX]

stock exhaust is 3inch at the collector then it goes down to 2.25 then it shrinks down to 1.5 which is killin it on the high end i went in the middle with 2.5 from the 3 inch collector and the 2.25 exhaust tubing. now im ready for my NOS or forced induction....

[Ray]

Hey Project you gonna run a groupbuy for the new cold air intake?

[PROJECTSX]

ok i cant do a group buy now because i been busy with this projectsx i am getting it ready for sema and believe me i will have lot of pics when the car is complete. but i can still get a good deal right now for all tsxclub members. the polished only for $255 shipped in the US to you and add $24 more for shipping to canada that is in US $. call ralph at (909) 682-0310 from 8a.m. - 5p.m. pacific time . monday thur friday. or email me at barbarianmotorsports@yahoo.com . it is worth every penny. thank you

[accsuperstar]

projectsx is there any chance that you will be taking your car to a dyno anytime soon? i would like to see what kind of gains you get with the injen intake AND the fujitsubo exhuast.

[PROJECTSX]

yes i hope to dyno with the intake and exhaust some time this month. i will post the results asap.

[Braydogg]

nice GB!!!...if acura is gonna sell the intake....you know they gonna charge an arm and a leg and part of your neck for the overall price!

[HondaMan]

So, anybody got some non-R&D pics of this CAI installed? Did we ever have a group-buy or something for this CAI? If not, where is the best price for it currently? :)

[Joker]

So, anybody got some non-R&D pics of this CAI installed?
I will later this week :thumbsup:

[HondaMan]

I will later this week :thumbsup:

Coolness...about time! ;)

[Joker]

Coolness...about time! ;)
Well, I would have installed it Friday if AutoWave's 600HP CRX had not been on the dyno :eek:
Joker - who has pic's, and video (need a host for the vid though) of the dyno if anyone is interested

[TSX 'R' US]

Well, I would have installed it Friday if AutoWave's 600HP CRX had not been on the dyno :eek:
Joker - who has pic's, and video (need a host for the vid though) of the dyno if anyone is interested
:eek: :eek:

[Joker]

:eek: :eek:
So is that a yes, you want to see it TRU?
Joker - who will make the thread tomorrow, and still needs a host for the vid's ;)

[TSX 'R' US]

So is that a yes, you want to see it TRU?
Joker - who will make the thread tomorrow, and still needs a host for the vid's ;)
:nod:

where are good sites to host large files?

[Joker]

:nod:

where are good sites to host large files?
I can host the photo's, but not the vid's (3.2MB, and 2.7 MB)
Any idea's?