PDA

View Full Version : are these piaa fog lights good? only US$20!!


ck122
04-24-2005, 03:55 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7969544176&category=33709

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7969738987&category=33709

you guys think which one looks better on the TSX? the blue one or the yellow one? thanks for any advice.

robert_tg
04-24-2005, 04:07 PM
I like the blue ones.
But you need housing no ?

ck122
04-24-2005, 04:13 PM
i think we just take out the original housing and hang these lamps with the included brackets but without any housing.
correct me if i m wrong.

robert_tg
04-24-2005, 04:43 PM
Have a look at the oem foggies instruction:
http://www.handa-accessories.com/tsx/08V31.pdf
looks like you need the "trim" pieces

ck122
04-25-2005, 02:55 AM
i thought the trim pieces just fit the oem fog lamps, dont they?
is someone sure about this?
please advice. bunches of thanks.

chocodai
04-25-2005, 03:54 AM
the OEM trim pieces will definitly not fit those
shape is totally different

ck122
04-25-2005, 04:24 AM
so i dont need any trim pieces and just use the mounting brackets to hold the piaa fog lights right?

robert_tg
04-25-2005, 04:26 AM
No idea how that's going to look. Please keep us updated on your progress

chocodai
04-25-2005, 05:31 AM
i think it will look nice if you can cut a hole in the fog cover and fit it inside...
but then again... if you screw up on the fog cover it will look ugly :donno:

BlackTSX
04-25-2005, 12:49 PM
I had these on my TSX...they were good lights but one of them broke when a rock hit the lense. But they are good, i had yellow ones.

robert_tg
04-25-2005, 02:07 PM
I had these on my TSX...they were good lights but one of them broke when a rock hit the lense. But they are good, i had yellow ones.

You dont have trim/cover for them ?
can you pls show a pic of how they look ?

How was the install ? need to drill any holes ?

Andynolife
04-25-2005, 04:55 PM
just hand them .. ~ that's the only way .. ~
u will likely fuk the OEM housing up .. cuz it's very hard .. ~

Noel
04-26-2005, 11:06 AM
If they're genuine PIAA, $20 is a steal. I'm sure there are many ways to mount them. You can even mount them behind the central OEM grille or simply under the central grille open slots instead of side mounting them.

Silv04TSX
04-26-2005, 11:56 AM
agreed 20 for piaa fogs is a steal considering the cheapest foglight they have i think its maybe 130 dollars. I thought about doing the same getting aftermarket fogs and mount them. I may go with catz lights though.

BlackTSX
04-26-2005, 01:07 PM
Let me find my pics....i didnt mount them in the fog light housing, i mounted them in the lower center grille area.