December TSX of the Month!

[Ray]

Owner: PROJECTSX
From : Riverside
Specs:

2004 Acura TSX

Fujitsubo exhaust ,
- Tein coil overs
- Kenstyle body kit,
- Injen Cold Air Intake
- Nology carbon fiber spark plug cover
- Jdm headlights
- Spc camber kits
- Ace alloy 19in x 8.5in klassic wheel with 235/35 toyo proxes 4 tires
- Custom Front Grill

[Ray]

picture #2

[Ray]

picture #3

[Ray]

picture #4

[Ray]

picture #5

[Ray]

picture #6

[Ray]

picture #7 - Tein Coilovers

[Ray]

picture #8

[21_in_az]

Project, I am one jealous mofo! I love your car, andi cant stop looking at the front bumper!

one quick question though......

do you know of any where to get a bigger throttle body?
i see yours is still stock, so i assume there isnt one available yet?


also, can you post a pic of your spark plug cover?

thanks man, keep up the awesome work, you make us all proud!


:jump:

[PROJECTSX]

hi thank you tsxclub.com . i dont think there is a throttle body out yet. the drive by wire throttle body is very new and i think hard to make. and let me see if i have a pic of the spark plug wire cover.

[PROJECTSX]

here we go

[BB1_VTEC]

nice rims....

[AcuraTSX03]

daaamn, thats sweet

[GSGOMEZ]

Hey Project, your TSX looked so hot!:D I wonder where did you get the Kenstyle Body kit and how much for whole body kits? I wonder if you have trouble with rubbing on 19X8.5 wheels with 235/35 tires? Because I checked at Discount Tire Co and they offered 19x7.5 wheels with 225/35 tires, not available at 235/35 tires. I think your wheels with tires looked awesome! I think 19 inch is better than 18 inch wheels. I wonder if you use your car as daily driving? I wonder how much for the exhaust on your car?
I will look forward to it, thanks bro. George :cool:

[schalliol]

Awesome, everything looks great, except the tacky logos.

[benggolf]

PROJECTSX, your TSX looks sharp and very aggressive! :D Great job.

[accsuperstar]

you have your dynos yet project?

[PROJECTSX]

i am working on getting dynos for the exhaust but INJEN intake dynod at 11hp at the wheels. and also i got the kenstyle kit from an importer direct from japan. $2000 US (paint extra) and the fujitsubo exhaust was $950. also my rims dont rub. daily driver and 19x7.5 or 8.5 is good try to get an high offset ,better. contact RALPH for info on the fujitsubo exhaust at (909)682-0310

[hondafreak4eva]

damn that grill is smiling at me ;)

awesome car!!!

[GT-40MarkIV]

So both of the cars are the same....Which one is newest? The first pic or the last pic's???

[PROJECTSX]

they are the same car i made that grill to go over the stock grill because i didnt like the big A . and i was waiting 2 months for my body kit from japan.

[GT-40MarkIV]

Thanx....Nice car by the way, I really like the Blue, arctic blue is it?
Very sharp

[mcknight]

what state is riverside in?

[Ray]

Originally posted by mcknight
what state is riverside in? I belive its California correct me if I am wrong PROJECTSX ;)

[PROJECTSX]

correct CALI is where its at.

[accsuperstar]

ahha im bored dynos from the weekend? :)

[PROJECTSX]

ok i went to injen and he was busy with a few projects and he told me they want to do an exhaust for my car so he wants to schedule my car in january to make an exhaust for my car plus he need to dyno the car stock , then intake and fujitsubo exhaust and then with injen exhaust all in one day . to get the most accurate hp specs. if we dyno it know and dyno it a few month later then you will not get an exact ready of the product.

[JTso]

Hey PROJECTSX, very nice setup! I was wondering if you only installed the rear camber kit, as I didn't see the front camber kit in the picture. Also, what offset did you use for the 19" wheels?

Thanks,

[PROJECTSX]

yes i only installed the rear camber kits and the wheels i am running are 19x8.5in with 40mm offset i had no choice that wheel only can in a 40mm .

[JTso]

Wow! 19x8.5 with 40mm! Did you have to roll the fender lips to fit? They look very nice on your car!

[PROJECTSX]

believe it or not no rubbing if i do go positive camber i probably will rub. one thing i like about the tsx is it has room to go wide wheels and big wheels. i want to fit 20's later in the future.

[ieTSX]

PROJECTTSX, I'm also in the inland empire and was wondering if you're displaying the TSX (beautiful car btw) at a local shop? Also, can you tell me who you ordered your Kenstyle kit from for $2,000? I'm interested in purchasing the kit, but havent been able to find it for less than $2500 through any resellers. Thanks alot man. -James

[PROJECTSX]

i do display the car at BARBARIAN MOTORSPORTS in riverside but not everyday. and yah call me (ralph) at (909) 682-0310 and i can tell you how to get the kenstyle body kit .

[Ray]

Hey PROJECTSX

Just wondering are you planning to add anything else to your car? :D

[dabuda]

sweet looking tsx :D

[PROJECTSX]

hi everyone and thanks to everyone, yes i do have some stuff in the works and waiting for products. a trunk lip spoiler from honda , carbon hood , and a big brake upgrade from stoptech. and also upgrade my sounds.

[cmgi8@yahoo.com]

check www.icbmotorsport.com, I know it's not on their website but they have the kenstyle body kit in stock and ready to ship. I have dealt with them a lot and they have lots of stuff!!!

[PROJECTSX]

also www.barbarianmotorsport.com has kenstyle body kits in stock . its not on the web site .

[cmgi8@yahoo.com]

PROJECTSX,

How much babarianmotorsport.com have this whole kit for? I'm currently shopping for a kit.

[PROJECTSX]

i think around $2000 US for the kenstyle complete kit .

[j.tear1080]

Is that grill in the first pic totally custom? or is it able to be purchased? I like it a lot! (Not The chrome one, but the black one)

[larchmont]

Is that grill in the first pic totally custom? or is it able to be purchased? I like it a lot! (Not The chrome one, but the black one)
Holy thread resurrection! :D

Speaking of resurrection, I think some people might have to come back from the dead in order for us to find out.

Or maybe not -- some of our people have a real good eye.

[j.tear1080]

yeah.. well Larch, i posted that and i wasn't expecting a reply, just thought i might get lucky though. :nervous:

[larchmont]

yeah.. well Larch, i posted that and i wasn't expecting a reply, just thought i might get lucky though. :nervous:
Indeed you might!

Some of our sharp-eyed people might be able to just tell.

[PROJECTSX]

not dead yet lol you mean pic number 4 i custom made that grill and it clips over the stock one but you have to take the chrome A out . also that grill is not chrome it is powder coated metallic silver from the sun you it is chrome. you can make the grill any color.

[j.tear1080]

Thanks Projectsx, however i was actually talking about the grill in the very first pic... This one.

[PROJECTSX]

that is the kenstyle grill it is part of the bumper you have to buy the whole front bumper to get that grill