Alignment for Lowered Cars in Mississauga?

[.::miLan]

I just called about 12 places that are listed as suspension/alignment professionals, and it seems as if nobody wants to touch a lowered car.

Typically, I go to Woodbridge Alignment, but can't stand the wait (last time I went there I waited two hours until they began to service my car).

Do any of you know any alignment shops in Mississauga, and how much they approximately charge?

Thanks in advance.

[pcdawg]

If you want to come east, our forum sponsor Speedstar has the laser alignment machine.

[scratchieepants]

Originally Posted by pcdawg

If you want to come east, our forum sponsor Speedstar has the laser alignment machine.

Oooh how much do they charge Phil?

Getting my Tanabe's, and Ingalls installed in early Sept.

[Cypher]

Speedstar did my alignment as well using their new Laser alignment system. It was around $100, but just call to get a more accurate pricing.

[scratchieepants]

Cool,

Thanks man~

[chuson]

Does that price incl. camber adjustment? Never did it there but I trust Speedstar.

[CANTSX]

All Tech auto at Midland and Lawrence did my DA and i was slammed to the ground and had no issues they have a drive on in ground lift that doesnt use a lift like Speedstar does so you just drive on it and lift it up, the plates are intigrated into the lift, pretty cool system they have there, ask for Sako, i got a 4 wheel alignment for 60$ say Eric from Teknotik sent you, im not Eric but i do know him well

42B Midwest Rd, Scarborough 416-750-0568

[GTSX-05]

I’ve acutely been to a couple alignment shops;

Gilman Auto in Scarborough, the alignment machine was not in ground so removal of my Mugen under spoiler was required. All and all decent experience but couldn’t stand the wait.

Woodbridge alignment – I acutely woke up extra early so my car was the first one in the shop, in ground alignment machine so removal of Mugen under spoiler was not required and the turn around time was great.

Woodbridge alignment is great but they operate on a first come first serve basis so just make sure your there extra early cause there always, I mean ALWAYS busy.

Others shops I've used is Appleton Motors in Malton, they have a great laser alignment machine but can not accomidate lowerd vehicles what so ever, I normally get our MDX aligned from there.

[Cypher]

Originally Posted by chuson

Does that price incl. camber adjustment? Never did it there but I trust Speedstar.

yes it does.

[evertp1]

Acura On Brant does it for like 60. I take my car there for all my services. No problems with my lip being scratched or damaged etc etc. Tell them you want Mike to do it.

But I second Speedstar as well. Except they are too far from me.

[scratchieepants]

Originally Posted by evertp1

Acura On Brant does it for like 60. I take my car there for all my services. No problems with my lip being scratched or damaged etc etc. Tell them you want Mike to do it.

But I second Speedstar as well. Except they are too far from me.

So would you recommend them (Acura on Brant) for "scheduled" maintenance as well?

I think I missed my 90k, and 120K lolsss

[.::miLan]

Originally Posted by evertp1

Acura On Brant does it for like 60. I take my car there for all my services. No problems with my lip being scratched or damaged etc etc. Tell them you want Mike to do it.

But I second Speedstar as well. Except they are too far from me.

Went to Dudebridge Alignment this morning, and miraculously by the time I got there, at around 9:00AM, there were already 10 "first-come first-server" appointments booked. Balls.


Just called and spoke to a Service Adviser at Acura on Brant (bought my car from this dealer):

Digital Alignment for all four corners
$118.00 + tax

[Racing Gear]

Milan,

The TAC giant Milan siad your dropp is looking real good! Post up some pics!

ARe you helping him install the Omni in his accord?

[.::miLan]

Originally Posted by Racing Gear

Milan,

The TAC giant Milan siad your dropp is looking real good! Post up some pics!

ARe you helping him install the Omni in his accord?

I'll post up some photos when I have time to do a shoot. The drop might be a bit too aggressive, but I've only scraped once so far, due to my own negligence.

I think I will have time this upcoming weekend to help him out with the Omni install on his Accord - provided I don't go fishing. It should be an easy install, as he had his current set-up installed less than a year ago - aka. no seized bolts.

[.::miLan]

Originally Posted by Racing Gear

Milan,

The TAC giant Milan siad your dropp is looking real good! Post up some pics!

ARe you helping him install the Omni in his accord?

Here you go:

http://tsxclub.com/forums/1st-gen-im...ress-date.html