Acura TSX Forum banner

Search results

1-20 of 207 Results
Advanced Search
  1. Methanol Injection

    1st Gen - Engine, ...
    I will have to disagree that methanol adds oxygen, that is why we use Nitrous. It is easy to break apart the n20 molecule to break off the "O", this adds in the combustion process. Methanol is basically Alcohol which burns itself, as opposed to the nitrous. methanol allows us to run a cooler...
  2. Methanol Injection

    1st Gen - Engine, ...
    My brother and I experimented with alcohol injection/water injection on his Grand National back in the late 80's to early 90's. Any injection is a band-aid for poor fuel delivery. We used it because the duty cycle of the injectors was maxed, and were still running lean with larger fuel pump...
  3. Any Black Friday deals coming this week?

    Heeltoe Automotive
    Just wondering if we can expect any deals this year. Thanks!
  4. KP Technologies Automatic Door Lock at Speed Install

    1st Gen - Electronics, ...
    Thanks, you just reminded me I bought both of these years ago and never installed!!! Now I will have to..
  5. Problem with rotor screw ! help! *URGENT*

    1st Gen - Suspension, ...
    Don't forget anti-sieze on the screws and you will never have to worry about this again!
  6. King Motorsports Cam Gear

    1st Gen - Engine, ...
    Anyone install a 40 degree gear yet? If so how difficult is it? Gains with flashpro worth it? TIA.
  7. Brake Replacment!

    1st Gen - Suspension, ...
    Myth that rotors "Warp". The only true way to warp a rotor is heat is up until it is almost glowing, then run it through a puddle of cold water, while having your lug nuts at different torque settings. Rotors will judder because the pads deposit dust and it heats up and after a while will...
  8. Brake Replacment!

    1st Gen - Suspension, ...
    Have to agree. I put Cross drilled on my 2K1 Maxima, with same Mfr. pad. Noticed in the rain quicker bite to the rotor. Have not yet put CD on the TSX yet, but looking.
  9. tein coilovers street edition

    1st Gen - Suspension, ...
    Where and why aren't you sharing?
  10. Blackstone Oil Analysis - 10,000 miles on Honda Genuine Full Synthetic 5w30

    1st Gen - Car Care, ...
    Hi All, I did Blackstone when I first purchased my TSX, and then one not too long ago (80K). I originally did the TBN just to check the car vs what the oil was actually doing. I changed it at about 5K, and the oil life indicator said it was due. Blackstone test result was that there was...
  11. Brand new kit from Tein coming soon; Street Flex!

    1st Gen - Suspension, ...
    Subscribed.:cool:
  12. RSB Swap Endlink Fail - Need Help

    1st Gen - General Car Topics
    When I put in my progress, my rear end links were rusted on. so I just took them off the top which were easy to get off and replaced them with my new RSB. Also put on some anti-sieze before bolting it all up. So if you want to adjust or remove in the future it is easy.
  13. The Flashpro Calibrations/Datalogs Thread

    ECU Tuning
    Can you recommend any good books that can help us TSX(ers)? I have looked around, and cannot find too much that appears relevant to an 08' TSX, and the abilities of flash pro. I have asked different people, and they all say the same thing. Educate yourself, but cannot offer up any good...
  14. The Flashpro Calibrations/Datalogs Thread

    ECU Tuning
    Since I have been looking at those IM's, can you say which one you like better? I want the low end torque, not looking so much for high end. TIA!
  15. Tuning the TSX (Import Tuner/Honda Tuning)

    1st Gen - Engine, ...
    They need to publish their Hondata Cals!
  16. The Flashpro Calibrations/Datalogs Thread

    ECU Tuning
    Thanks for the tip, I will try to locate one. Had lots of experience with mt brothers Grand National in the late 80's. Lots of trial and error with that one, some goofy as well. We tried to cool down the intake temp by running the fuel line through a box, filled it with dry ice and a mixture...
  17. Stupid Question

    ECU Tuning
    Ok, reloaded software, and chose the MT and AT. and now I have some cals. But when I reload again with only MT selected, I do not get any cals. So can I use MT cals on an AT?
  18. Stupid Question

    ECU Tuning
    No preloads, mine are all blank. Also updated the software, running windows 7 FWIW.
  19. Stupid Question

    ECU Tuning
    Ok, Got flashpro installed, and locked to car. My stupid question for the night is, can I only see the calibrations when connected to the car? I have flashpro to laptop, but not to car right now, and thought I should be able to look at the different cals available-No? Or did I miss something...
  20. ATLP Exhaust...yea another exhaust feeler thread

    1st Gen - Engine, ...
    Marcus, my .02. I think this can be done, I had a 2K1 Maxima, and had this cat back on it (CB-G5): Cattman Performance Stainless and $599. It was built very well, all mandrel bent, and sound under acceleration with the Y pipe was better than a G35. I guess my point is this can be done, and...
1-20 of 207 Results
Top