Acura TSX Forum banner


  1. Purchased new headlight bulb, worked for a few hours and then stopped it the ballast?

    1st Gen - Problems and Fixes
    Hello, I just purchased a 2005 TSX, and the right headlight bulb wasn't working. I replaced the bulb, it worked great for a bit until I checked later in the evening and it stopped working again. From what I've read, it could be the ballast and/or igniter. The next day, I turned on the...
  2. Need help to fix low beam headlight

    Automotive Discussion
    I just replaced the low beam headlight, ballast and igniter on my 2005 Acura and the light still does not come on. I purchased the parts from Ebay. Any advice??? Please
  3. installing aftermarket ballast

    1st Gen - Problems and Fixes
    so I'm swapping out the ballast for my low beams; bought the kit off HIDExtra. i have no problem splicing the connect in and hooking up everything, however i dont know how to seal up the hole at the bottom of the headlight housing where the old ballast fit in. am i missing an easy solution...
  4. New HIDs with burning smell and smoke

    1st Gen - Electronics, ...
    I have a 2004 Acura TSX that I bought in decent condition. A few months ago my low beams started flickering on and off randomly. Until one day they would not turn on, no matter what I did. I searched for an answer here on the forums and I found out that my ballasts were needed to be replaced...
  5. 2004 Headlight Ballast

    TSX Classifieds Archives
    Looking to buy a ballast for a headlight
  6. Using mismatched 04 and 06 HID ballasts

    1st Gen - Electronics, ...
    Hello, I have an 06 but one of my ballasts went out and there is 1 04/05 ballast for sale locally. I was wondering if anyone knows if you can use mismatched year HID ballasts and if there would be any issues. Thank you!
  7. HID wiring harness help

    2nd Gen - Problems and Fixes
    Hi, I have a Canadian version of the 2 gen TSX. The Canadian version comes with halogen (H1) low beams instead of the DS2 HID's. I bought a set of U.S. version HID Headlights and the OEM Acura ballasts and igniters. The problem is that the Canadian version wiring harness has the plugs for a H1...
  8. Ballast? Igniter? Electrical?

    1st Gen - Electronics, ...
    Hi guys - my passenger headlight on my '05 kept blowing through fuses so I got my ballast (and bulbs) replaced. I also had fog lights installed, I'm not sure if it's connected to my problem or not. NOW the passenger light turns on but then goes out after 30 seconds to a minute. I do not notice...
  9. Where did you put the HID Ballast and extra wires for Fog Lights?

    1st Gen - General Car Topics
    Hey TSXClub community! I owned a TSX for awhile now but I'm new to the whole modification thing. I looked around the internet and this forum, but I can't seem to find anything about where to put the ballast and the extra wires for the HID Fog light kit. I did find some people who screwed...
  10. 2008 hid ballast problem

    1st Gen - Problems and Fixes
    One of my ballasts went out on my 2008 acura tsx, What options do i have? im trying to save some money 170 is steep for a new ballast at the dealer...
  11. LIGHTS won't work

    1st Gen - Problems and Fixes
    All right so my 05 tsx driver side headlight has been messing with me. The problem was the light would turn off I had changed the bulbs from OEM to 8k HIDs they work fine for bout six months and now only the driver side is messed up. So I changed the bulb first but the flickering and the...
  12. 04-05 headlights, oem hid ignitor

    TSX Classifieds Archives
    1 OEM HID IGNITOR SOLD to integrao 1 Pair 04-05 Headlights in good condition.NO Projectors or Bulbs. Normal wear, no cracks or leaks. Just needs a little cleaning. $125 + Shipping
  13. Random TSX accessories

    TSX Classifieds Archives
    2 55w slim HID ballasts + 2 55w 3000k HID h11 bulbs. Purchased a year ago from DDM tuning. - $40 Fog Light kit with all necessary wiring + button. Fog light glass is burned and cracked. Bulbs are 3000k nokyas and used for about 10k miles. - $40 Stock airbox, top and bottom. One of the...
  14. HID Ballast Removal

    2nd Gen - Problems and Fixes
    Hi guys.. One of my low beam headlights stopped working after i replaced the factory HID bulb to a 10000k bulb. Not right away though.. almost a year after. The HID Ballast is hidden behind the front bumper and i need instructions on how to get to the ballast. I don't think i can reach the...