Acura TSX Forum banner

lock actuator

  1. NEED HELP! Stuck on removing 3 countersunk screws that’s holding the lock assembly in place.

    1st Gen - Problems and Fixes
    Hey guys, I recently just bought a 2006 Acura TSX. It’s a really good looking car! When I bought it, both power locks in the front didn’t work, and from research I believe that the actuators needed to be replaced. I thought this would be a fun little project to do, so I searched up tutorials...
  2. Car is now locking by itself

    1st Gen - Electronics, ...
    I have a 2004 TSX and the driver’s door power lock was not working correctly. I had the lock actuator replaced and the lock works with the FOB and when the lock button is pressed on the door. However I have picked up some issue since the actuator has been replaced. 1. The worse issue is...
  3. Locking issue (my car is bugging out)

    1st Gen - Problems and Fixes
    Hello fellow tsx owners, Last night i got a call from a friend saying that my park lights were on I went out to my car and every door was closed but the parking lights were on, i then noted that as i unlocked the car with the remote, THERE WAS NO RESPONSE. I then put the key in the door and...
  4. Passeneger lock wont work!!!

    1st Gen - Problems and Fixes
    Hey guys, for some reason the passenger front door lock on my 04 tsx wont open with the alarm or the door lock button on either the driver or pass. side buttons. I have been doing some research on the topic and ive found tht ppl are saying tht it is the lock actuator. I have read somewhere...
Top