Acura TSX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
Hi guys, I got some work wheels(18X8 + 38) that come with 2 tires (215/40/18). I was going to use those for the front and buy 225/40/18 for the rears. Would it fit flush on the rear without scraping and would 215/40/18 for the front be okay? thanks.

Edit: I'm lowered with 1 finger gap on front and 1/2 in the rear.
 

·
long-term build
Joined
·
2,761 Posts
not going to be flush in the rear.
being flush means rolling fenders and such, have you done that?

you'll want to at least throw some 5mm spacers on the back.
 

·
long-term build
Joined
·
2,761 Posts
well lemme go look at my car.

I run 18x8 +37 with a 225/40/18 on my back with no fender work...

should fit perfect.
if not, just add a 5mm spacer, but it should work perfect as is.
mine is tucking perfect, and I have about 1mm to spare.

what it's going to be is a matter of camber.
if you're into the whole negative camber thing, you'll want some
spacers. I think my backs are sitting at negative one degree.
-1.0* on both back sides, so in terms of camber, that's really nothing.

so to summerize, lol:
with -1.0* of camber it should fit and tuck perfect.
 
1 - 4 of 4 Posts
Top