[hondalove42484]

I have an 06 6 speed and flashpro...Did you have a fully populated can adapter with no free slots and 1 single yellow wire on the can harness topmost and rightmost position?

 

[hondalove42484]

Hey I know you probably have it figured out by now but it is an easy fix I just did it myself just by looking at the CAN harness. You just plug the wires into the same spot you would have with the plug that's supplied but you won't use it in this situation. Just plug into the middle at the top. Don't use the outside empty spot use the middle two.

thank you bro, I tested the #2 and #3 (2 inside terminals to see if they were CAN H and L