Acura TSX Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hey guys,

So the other day my A15 service light came on. I mostly do all these services myself so I was wondering if anyone had the A15 service "check list".

Thanks in advance!

EDIT: This is for my 2006 TSX.
 

·
Registered
Joined
·
1,370 Posts
It's in page 414 of your owner's manual.

Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the display the next time you turn the ignition switch to the ON (II) position.

If maintenance service is done by someone other than your dealer,
reset the maintenance minder as follows:

1) Turn the ignition switch to the ON (II) position.

2) If the engine oil life is not displayed, press the SEL/RESET
button on the steering wheel repeatedly.

3) Press and hold the SEL/RESET button on the steering wheel for
more than 10 seconds. The remaining engine oil life reset mode will be shown on the multiinformation display.

4) Select ‘‘RESET’’ by pressing the INFO ( / ) button, then press
the SEL/RESET button to reset the engine oil life display. The
maintenance item code(s) will disappear, and the engine oil life
will reset to ‘‘100.’’ If you want to cancel the oil life reset mode,
select ‘‘CANCEL.’’
 

·
What to put here?
Joined
·
1,990 Posts
Hey guys,

So the other day my A15 service light came on. I mostly do all these services myself so I was wondering if anyone had the A15 service "check list".

Thanks in advance!

EDIT: This is for my 2006 TSX.
A = replace engine oil
1 = rotate tires
5 = replace engine coolant MT 1.43 gal, AT 1.4 gal Acura long life antifreeze/ coolant type 2
 

·
Registered
Joined
·
10 Posts
It's in page 414 of your owner's manual.

Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the display the next time you turn the ignition switch to the ON (II) position.

If maintenance service is done by someone other than your dealer,
reset the maintenance minder as follows:

1) Turn the ignition switch to the ON (II) position.

2) If the engine oil life is not displayed, press the SEL/RESET
button on the steering wheel repeatedly.

3) Press and hold the SEL/RESET button on the steering wheel for
more than 10 seconds. The remaining engine oil life reset mode will be shown on the multiinformation display.

4) Select ‘‘RESET’’ by pressing the INFO ( / ) button, then press
the SEL/RESET button to reset the engine oil life display. The
maintenance item code(s) will disappear, and the engine oil life
will reset to ‘‘100.’’ If you want to cancel the oil life reset mode,
select ‘‘CANCEL.’’
Thanks.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top