Installed ACME RGB Demon eyes on my 04 TSX. Purchased the demon eyes from TRS for $25. Took about an hour to wire it all up. I used a DRL Relay to power the bluetooth RGB controller and just wired the Demon eyes to the controller. Made slight modifications to the plastic mounting bracket that came with the demon eyes. The bracket is for H1 projectors so I just had to put two holes in the mount to line up with the D2S housing. I mounted them to the bottom of the projector since there was already a hole in the bottom of the projector for the LED to shine into the housing. They work great in low light but are still visible during the day.