Acura TSX Forum banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
311 Posts
Discussion Starter #1
With the stiffer springs replaced in the change lever, you will notice it to be more easy to get into gears. The gear will position more accurately and lesser chance to miss shift.






65 CDN Aprox. 59 USD + Shipping

For Manual Transmission


Thanks

Calvin
 

·
Registered
Joined
·
455 Posts
Unfortunately this will do nothing for the left-right distance and the likes of a Mugen/Spoon short shift unit is much more appealing, albeit at a much more expensive price.

Is that what Alex say or have you put one in a TSX Calvin and tried it for yourself, to see the difference?
 

·
Premium Member
Joined
·
311 Posts
Discussion Starter #3 (Edited)
PJS said:
Unfortunately this will do nothing for the left-right distance and the likes of a Mugen/Spoon short shift unit is much more appealing, albeit at a much more expensive price.

Is that what Alex say or have you put one in a TSX Calvin and tried it for yourself, to see the difference?

This unit dose not shorten the the shifter it just improves the feel of the shift, it will make it more accurate to get into gears.
 

·
無限 - Mugen
Joined
·
391 Posts
Is this item available now?
Last time I checked the site I wasn't sure.

If it is available, I may be calling to add this to my Euro-R kit that I ordered.
What's the best time to reach you?
 

·
Premium Member
Joined
·
311 Posts
Discussion Starter #5
spoonfed said:
Is this item available now?
Last time I checked the site I wasn't sure.

If it is available, I may be calling to add this to my Euro-R kit that I ordered.
What's the best time to reach you?

Yes it is...YOu can just call the shop 604 279 0329

Thanks

Calvin
 

·
Premium Member
Joined
·
311 Posts
Discussion Starter #7
puiyingbread said:
how much does it cost to install it at AJ??

Please PM me for pricing.
 

·
Premium Member
Joined
·
311 Posts
Discussion Starter #8
Here is a quick DIY

1. Remove Battery
2. Remove intake
3. Remove both shift cables
4. Remove 4 bolts cirlcled in picture
5. Follow 2nd picture








Thanks

Calvin
 

·
無限 - Mugen
Joined
·
391 Posts
I placed an order today for the ALEX Reinforced change lever spring.
Looking forward to see how it helps.
When it arrives and it's installed, I'll leave some feedback of the difference.
 

·
Premium Member
Joined
·
311 Posts
Discussion Starter #11
narci said:
I assume you need to remove the exhuast to get access to the shifter components?

No you do not need to remove the exhuast to access the compnents

Thanks

Calvin
 

·
無限 - Mugen
Joined
·
391 Posts
When mine arrives and I install it I'll leave some feedback.
Should be in the same box as my Euro-R bodykit which should be here mid September.
Unless someone else picks this up and installs before I do.
 
1 - 13 of 13 Posts
Top