Acura TSX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter #1
Okay,


so my compressor was making a little tapping noise here and there no big deal but it worked great so no worries.


NOW, as Yuma AZ summer approaches today it decided it didnt want to work at all anymore.


My fan engages when i turn A/C on, but not the compressor, so i guess it could be a clutch issue, however my Low pressure line reads unreal high pressure, not sure how high as the can's gauge has no actual numbers but its reading in the RED area by far.



Im going to contact Honda/Acura monday as i have heard alot of the 04 and their issues. How would i check the clutch or just in general to narrow it down to the compressor?




Ryan
 

·
Registered
Joined
·
83 Posts
When the compressor is off, the pressure in the system equalizes. Thats why it is reading high or aka the red. That gauge is only for when the compressor is running. Id bet if you get the compressor to spin, it will cool!
 

·
Registered
Joined
·
166 Posts
Discussion Starter #4
What is a easy way to see if its just the relay? I see a lot of people mentioning after a compressor swap it ends up being the relay
 
1 - 4 of 4 Posts
Top