Acura TSX Forum banner
1 - 2 of 2 Posts

·
Royal Flush Crew
Joined
·
791 Posts
Discussion Starter · #1 ·

·
Somaek juseyo?
Joined
·
1,292 Posts
What size and length bolts do you use with the oem spring clips?


Sent from AutoGuide.com Free App
M6 1,0 mm x 28mm. Recommended by this DIY: http://www.tsxclub.com/forums/1st-gen-car-care/20957-06-08-euror-kit-installation.html

It's the gold colored bolts. They don't need to be that long per se, but the bolt heads face toward the ground with the threads facing up so it doesn't really matter. I did this install myself too, so if you have any questions, lemme know.

Because of the store I had to buy these from, I had to buy many of the clips and bolts in bulk, including the black speed nuts, and black body screws. If you need any, lemme know and I'll send em out for free. Shouldn't cost me but a few stamps if that.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top