I have an issue as the title says. I just replaced my axle 2 days ago and when I installed them and test drove the vibration from 50 - 65ish is still there. Right now I want the vibrations to stop but I have no clue what is the cause of it now. Can someone shed some light on this?
Axle's replaced but still shakes
1 - 9 of 9 Posts
Joined
·
2,371 Posts
Balanced tires/wheels?
also check all your bushings from your upper A-arm to the lower one, all the rubber bushings.
also check all your bushings from your upper A-arm to the lower one, all the rubber bushings.
Joined
·
941 Posts
you're not the first to have this happen... much like many others, i have been following all the axle threads closely.
did you go with OEM? you'd be the second instance of new OEMs still having the 'wobbles' from what i can remember. i'm getting closer to doing Marcus' fix!
Joined
·
941 Posts
oooh good info here. i only have the 20-25 mph shakes, so it sounds like the Heel Toe fix is right for me.
I recently got new rims and tires about 3 months ago so I wouldn't think this would be the cause but i'll have a check on my next rotation.
I was also assuming it could be the bushings or bearings. I will need to look into this more. Thanks for the info.
I actually have after market ones. TBH these are my 4th set of axle that i have replaced due to the shaking. It's only this time that the shaking is still there when i swapped out the axles.
Also marcus fix is also looking like an option due to how frequently I swap out my axles. I just need more assurance that when I do purchase it, it will be fixed for a LONG time.
This does sound good. I will look into doing this. Do you have more info on how you replaced the shaft bearing? a DIY perhaps?
Joined
·
7 Posts
check your tie rods, it was my problem on my old 94 accord
1 - 9 of 9 Posts
