Acura TSX Forum banner
1 - 4 of 4 Posts

·
四世
Joined
·
1,767 Posts
Discussion Starter · #1 ·
I was taking measurements of my coilover bushings today and when I re-mounted my coilover, I noticed it was almost touching the endlink, seen in the picture.



While driving, I could hear the coilover hitting the endlink. How do I make the adjustment so the coilover isn't so close to the endlink?
 

·
Registered
Joined
·
21 Posts
Nope...she's sitting with a finger gap.
hey bro..
I was inspecting what is causing my rear bc n+ making the noise and I just realised mine is exactly like urs.. almost touching.. just 1.5mm gap.. im also 1 finger gap.

I managed to take off the endlink and still the making the loose and metal to metal clunking noise...

did u manage to find an answer? im going to reinstall the rsb & endlink and adjust it.. hopefully it will solve the enlink touching the coils. fingers crossed
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top