Acura TSX Forum banner
1 - 10 of 10 Posts

·
Bardi
Joined
·
1,346 Posts
Discussion Starter · #1 · (Edited)
$200 shipped takes them.

I had these shipped from the Netherlands a few years back, and they have been just sitting on my storage shelf. I figure I would do some spring cleaning with some of my parts.

They are Non-Hid but they can be upgraded with an after market kit, or you can swap the guts over to your oem TSX ones. The motors that moves the beam height up and down (cant buy in the U.S) are included. Driver side missing the low beam lid. Driver side is OEM Honda. Driver side had the silicone packet break during shipping, and it will need to be cleaned out. Passenger side is DEPO. I test fitted these and I cant tell between the DEPO and Stanley. They both fit and look perfect.

The outer shells are 7/10 and 8/10 condition, with a little elbow grease you can buff these very easily. There are no deep scratches or dings. Just light normal wear.










Lens Condition.


 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top