Acura TSX Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
280 Posts
Discussion Starter #1
I just got my Euro Grille in but I do not know how to put in the color match trim on the grill. Do i buy screw and screw it in? if so what size and type of screw?

And my Last question is the Honda H emblem for the grille has nothing to hold it in. It just has to stubs and nothing else but my rear H has two clear clip things which I assume will hold it in place. So How do I secure the Honda H on the grill?

this is the only pic I have for now will post more after I get out of work. any comments will help thanks!!

 

·
fresh to death
Joined
·
2,643 Posts
the trim it self gets screwed onto the grille...not sure what type of screws...i think you can just get the ones from your stock grille(from the chrome trim)
as for the front emblem, i used double-sided tape to go along with the clips...
 

·
unofficial city snowplow
Joined
·
837 Posts
you should have received small screws for the matched trim. call your honda dealer, you can get them through them. they're really really small. as per your H, you should have two little circles that kind of look like washers but they have a small hole with some slits. you push those onto the stubs and that holds them in place.

i got all that stuff when i ordered my grille...
 

·
Registered
Joined
·
280 Posts
Discussion Starter #5
thanks guyz!!!!! I def did not get any screws with my grille Nor the washer type things that go behind the front H. I guess I will have to order them from the dealer. How would I approach ordering these small screws and washers? I have all the part numbers for every single item so can I just order the screws seperate? I might just hit up my local shops and see if I can find anything that will do the job and Use wat ever holds up my Acura A for the H.
 

·
Registered
Joined
·
360 Posts
you should have received small screws for the matched trim. call your honda dealer, you can get them through them. they're really really small. as per your H, you should have two little circles that kind of look like washers but they have a small hole with some slits. you push those onto the stubs and that holds them in place.

i got all that stuff when i ordered my grille...
+1, where'd you buy it from? It came with mine, ordered from Heeltoe.
 

·
Jon Daily Boulevard
Joined
·
5,554 Posts
the trim it self gets screwed onto the grille...not sure what type of screws...i think you can just get the ones from your stock grille(from the chrome trim)
as for the front emblem, i used double-sided tape to go along with the clips...
+1 Just use the screws from your OEM Acura grill. They are exactly the same. Save some money. :)

For the "H", the "washer type" clips are pushed onto the rear posts of the "H" emblem to secure it to the grill.

BTW nice Coach bag. :lol:
 

·
unofficial city snowplow
Joined
·
837 Posts
+1, where'd you buy it from? It came with mine, ordered from Heeltoe.
got mine from Speedstar in Toronto. i remember that the little washer-type things came in a Honda bag, but the screws were packaged individually as singles.

yeah, i supposed you could use your original ones, just be careful with them, i found that they don't easily go into the trim and can easily strip.

gl to the OP with the install.
 

·
Registered
Joined
·
280 Posts
Discussion Starter #9
+1 Just use the screws from your OEM Acura grill. They are exactly the same. Save some money. :)

For the "H", the "washer type" clips are pushed onto the rear posts of the "H" emblem to secure it to the grill.

BTW nice Coach bag. :lol:
hahahahahahaha ^^^ that my girls bag lol so funny that u know its a coach bag lol. It is an Assistant Coach bagg cuz I can't afford the real one lol hahaaha jk

I got the grille from JDMGoodies for way cheaper ! and a one week wait. so not having screws is still way worth it. I will use the Acura screws and call it a day!!
 
1 - 10 of 10 Posts
Top