Acura TSX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter · #1 ·
Got into an accident and I need to have my door and quarter panel replaced.

Car is in the body shop, but I started wondering if anyone on here has ever replaced their own door or panels?
 

·
iVTEC no koe
Joined
·
1,913 Posts
Car door is relatively simple, just the hinge bolts and the wiring harness and possibly some less important items. If you're doing it solo, just make sure you setup a support rig for the door, so you can one-hand it as you unscrew the bolts. I used an old tire with plywood and a piece of carpet on top. When reinstalling, it's best to make sure your rig setup is lined up almost perfect. It's a bitch to line up if you are off by like 1cm.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top