Acura TSX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
199 Posts
Discussion Starter · #1 ·
I lost this grommet (91503-SZ3-003, #23 in the picture below) which allowed the fender liner to drop far enough to rub on the wheel. Thankfully I got to this in time to prevent it from rubbing through the liner. I didn't take action soon enough on the other side, which allowed it to rub through.

Thankfully that was a cheap lesson, since an inner fender liner is only ~$85, but it would have been much cheaper if I had noticed it sooner.

I looked at every screw, bolt and grommet to find every other one was still in place. That was the only one that was missing, and it allowed the fender liner to drop far enough to rub on the tire.



Automotive tire Grey Automotive wheel system Automotive exterior Bumper

Motor vehicle Font Engineering Auto part Automotive exterior
 

·
Registered
2011 Acura TSX
Joined
·
15 Posts
Thanks for the info, Ill check that I have all of mine too, If I can see in there as I recently had coilovers put on so there's very little space from wheel to fender!
 
1 - 2 of 2 Posts
Top