[Sinistah89]

Hey guys,
I am installing these tomorrow with my friend and was wondering if theres anything to watch out for since its the second generation and not the first gen? I can only find instructions for the first generation.

 

[Ulrblitzer]

There's a few dismantling threads on the other site. Everyone says the rear are a bit harder. Find someone to stand on you lug studs to give you enough clearance to drop the strut assembly.

 

[Jdmdomo]

In for pictures

 

[Holden_B_Lunts]

The rears are harder than the fronts. It makes it way easier if you take the two 12mm bolts off that hold the sway bar bracket. And if you loosen all the bushing bolts so that the control arms can droop freely. You need to loosen all of them to clock them anyway....so you may as well.

I did a DIY for coilovers. I have since modified my install method to make it easier. But...you can also change the methods around a little for lowering springs if you know what you're doing. If you're new at this...my coilover DIY would likely have you confused if you were trying to do lowering springs.