Acura TSX Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
182 Posts

· Registered
Joined
·
325 Posts
Found some for 420 shipped.

Those are Halogen, not HID, btw. It lists the 55w H11 high beam, and would say 35w D2S below that if it were the correct HID model. Zoom in on photo 7, at the information stamped on the black housing in front of the grey low beam cover.
 

· -
Joined
·
1,812 Posts
???? Those are HID low beams and halogen high beams like every 1st Gen TSX made.



The Ebay headlights that Evil804 linked are the desirable 2006-08 JDM Accord lights. US$359 + shipping.


The same seller has the less desirable 2004-05 JDM Accord lights for US$185 + shipping.



 

· Registered
Joined
·
325 Posts
???? Those are HID low beams and halogen high beams like every 1st Gen TSX made.



The Ebay headlights that Evil804 linked are the desirable 2006-08 JDM Accord lights. US$359 + shipping.


The same seller has the less desirable 2004-05 JDM Accord lights for US$185 + shipping.



TSX? Sure, all were HID equipped. Those however are not TSX headlights, they're CL7/CL9 global Accord headlights.

While most CL7/8/9 did have HID equipped headlights, not all did worldwide.
For example, in New Zealand any trim below the Luxury or Luxury Sport designation did NOT have HID's. All do however have Projectors.

Here's a photo I just took of my spare J7 Japan-spec true Euro-R lights, the ones with the black chrome. Notice it lists a 12V 35W D2S low beam?
47484


The ones linked do not have that designation, and I'm unsure what region the "Q5" designation code is referring to.
47485


The more ya know 🌈⭐🎵
 

· Registered
Joined
·
325 Posts
Also, since I haven't seen it mentioned anywhere before, if you do pick up a set with the automatic leveling motors they are still manually adjustable without needing to pop anything off the motor or housing. I've seen that mentioned before and it's unnecessary. Mine have the motors, and below this I've circled where you simply insert a Phillips head screwdriver into the housing and adjust the vertical axis as needed. Use a standard Phillips, just one that doesn't have too wide of a shaft. All of my Phillips were barely too wide except for a Snap-on and whatever blue/black brand AutoZone sells (Autocraft maybe?), I can't remember the name; 4 or 5 others were just slightly too thick. Best of luck!

47486
 

· Registered
Joined
·
5 Posts
TSX? Sure, all were HID equipped. Those however are not TSX headlights, they're CL7/CL9 global Accord headlights.

While most CL7/8/9 did have HID equipped headlights, not all did worldwide.
For example, in New Zealand any trim below the Luxury or Luxury Sport designation did NOT have HID's. All do however have Projectors.

Here's a photo I just took of my spare J7 Japan-spec true Euro-R lights, the ones with the black chrome. Notice it lists a 12V 35W D2S low beam?
View attachment 47484

The ones linked do not have that designation, and I'm unsure what region the "Q5" designation code is referring to.
View attachment 47485

The more ya know 🌈⭐🎵
Hey! A little late to the party. First off, I appreciate the information on the different headlight specs. I would love a set of the J7’s . Im a big fan of dark chrome.
Second, I did see you state that you have a spare set. Would you be willing to part ways with and sell them by chance !!?
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top