Acura TSX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
163 Posts
I have a red one, used 3M tape instead of bolting it on bumper. Hasn't budged since installation. Been on for almost 5 months.
 

·
Registered
Joined
·
103 Posts
i took off the stock bracket, flipped it over and attached it to the lower part of the bumper, offset from the center. just had to drill 2 small holes, and make sure it was straight. didnt cost anything except about 5 minutes of my time, and it looks better than the stock location. ill get a picture tomorrow.
 
1 - 3 of 3 Posts
Top