[2006navytsx]

So i own an 06 tsx with nav and has never had a disc. i finally purchased one..that seems to be compatible. When i first started the car the screen said downloading and after a few mins it said pls enter code. Once I entered the code it states pls move vehicle in open area for ten mins as I started to move the car this screen pops up. It was on for about 20 mins till i gave up....funny thing is once its in this detecting mode you can operate or touch the screen. Any help would be appreciated.

 

[sj993]

This is the navi diagnostic screen. I assume you mean you can't touch or use the screen while it is in this mode. You can't actually use the touch screen, but you can use the knob to move around to the various options and then push in on the knob to select it. The knob I am referring to is directly underneath the Acura logo under the screen. If you can do that, try to go to exit diag and push in on the knob, then see if the navi will come up. Also, when you are in an open area, the navi should come up in a couple of minutes, it doesn't take very long.

I have not seen that particular screen myself, but I'll try to see if I can find it in the diagnostics screen.

 

[2006navytsx]

Thanks so much for your response...ive been trying to find a solotion and I believe others that used this particular (4.62) disc has had this same issue. So most have had a simple fix in which i will try and attempt tomorrow.

 

[sj993]

No problem, let me know how it works out.

Also, you can access the diagnostic screen anytime by pressing and holding map/guide, menu, and cancel at the same time for about 10-15 seconds till it comes up.

 

[jam sandwich]

Thats just the diagnostic screen, and is there to make sure all systems are talking to each other and are operational. You can also calibrate the touch screen in those options. You can normally access this menu by hitting MAP/GUIDE+ MENU + CANCEL
If you'd like an updated version 4.A2 (2012) of the maps, I have a spare 'backup' disc I burned for someone who ended up not needing it..

 

[2006navytsx]

Thats just the diagnostic screen, and is there to make sure all systems are talking to each other and are operational. You can also calibrate the touch screen in those options. You can normally access this menu by hitting MAP/GUIDE+ MENU + CANCEL
If you'd like an updated version 4.A2 (2012) of the maps, I have a spare 'backup' disc I burned for someone who ended up not needing it..

Hey guys I cleared it by holding those buttons. Got everything to work now appreciate everyone's help.

 

[Chapel]

Sorry to revive an old thread but mine does this every start. I can get out of it using the 3 buttons though.