Acura TSX Forum banner

My navigation is acting weird..has anyone seena Diagnostic screen before?

6834 Views 6 Replies 4 Participants Last post by  Chapel
So i own an 06 tsx with nav and has never had a disc. i finally purchased one..that seems to be compatible. When i first started the car the screen said downloading and after a few mins it said pls enter code. Once I entered the code it states pls move vehicle in open area for ten mins as I started to move the car this screen pops up. It was on for about 20 mins till i gave up....funny thing is once its in this detecting mode you can operate or touch the screen. Any help would be appreciated.


See less See more
1 - 2 of 7 Posts
This is the navi diagnostic screen. I assume you mean you can't touch or use the screen while it is in this mode. You can't actually use the touch screen, but you can use the knob to move around to the various options and then push in on the knob to select it. The knob I am referring to is directly underneath the Acura logo under the screen. If you can do that, try to go to exit diag and push in on the knob, then see if the navi will come up. Also, when you are in an open area, the navi should come up in a couple of minutes, it doesn't take very long.

I have not seen that particular screen myself, but I'll try to see if I can find it in the diagnostics screen.
No problem, let me know how it works out.

Also, you can access the diagnostic screen anytime by pressing and holding map/guide, menu, and cancel at the same time for about 10-15 seconds till it comes up.
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.