Acura TSX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
I would def try adjusting the shaft on the pedal. I just did my master cylinder and that fixed the 2nd, 4th and reverse slight grind I had but I am not sure if it was from a weak master (it was bad, squeaking and not feeling smooth) or the adjustment. I didn't touch the new one and have good free play when the pedal is out as well as about 1/2"-1" off the floor till it grabs.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top