Acura TSX Forum banner
1 - 3 of 3 Posts

·
, Moderator Emeritus
Joined
·
5,352 Posts
Sweet...nice ride bro! :thumbsup:

BTW, what % tint is that? That is the next thing I plan to do on my ride. :)
 

·
, Moderator Emeritus
Joined
·
5,352 Posts
Andynolife said:
Noel .... i just got the NGK Laser Iridium spark plugs ...
so do u think i can install it by myself with proper tools ?
and wut should i be awared of ??
thanks
Sure, with the proper tools it would be a easy. It's an inline 4 so the spark plugs are pretty easy to get to with a spark plug socket & extension.
 

·
, Moderator Emeritus
Joined
·
5,352 Posts
Andynolife said:
so wut's the tq spec for those bolts ? ... and do i need new bolts ?
Bolts? The spark plugs screw in like bolts...I guess that's what you mean.

Here are the torque specs notes from a K20 (EP3) engine, which I'm pretty darn sure are the same as our K24 engines:

Apply a small amount of anti-seize to the plug threads, and screw the plugs into the cylinder head finger-tight. Then torque them to 18 N.m (18 kgf.m, 13 lbf.ft).

Also, the electrode gap for the spark plugs is 1.0mm-1.1mm (0.039-0.043 in.). This info might be in your owner's manual...I'm too lazy to go look. :)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top