Acura TSX Forum banner
1 - 20 of 57 Posts

·
Clutch Dump of Death!!!
Joined
·
830 Posts
I've had my NST pulleys on my TSX for almost a year and love 'em. Excellent quality, noticable gains and price that can't be beat for the craftmanship. Glad to see you become a vendor NST!
 

·
Banned
Joined
·
39 Posts
Discussion Starter · #4 ·
I've had my NST pulleys on my TSX for almost a year and love 'em. Excellent quality, noticable gains and price that can't be beat for the craftmanship. Glad to see you become a vendor NST!
Thank you for the kind words :)

Glad to hear that you are enjoying your NST kit!
 

·
Super Lurker
Joined
·
43 Posts
I wouldn't suggest using one these pulleys on the crankshaft pully, because it can damage the engine. D your homework :)
 

·
Premium Member
Joined
·
2,946 Posts
I wouldn't suggest using one these pulleys on the crankshaft pully, because it can damage the engine. D your homework :)
Everything, even normal driving, will damage the engine. Should I just leave my car on the driveway and never turn it on so I don't damage it? :laugh: It's just a car, and if it has to get beat up a bit more than normal to be faster, then so be it. Don't come in here trying to bring down a vendors sales just because you are afraid to buy pulleys.

I ordered my pulleys earlier this week and I can't wait for them to get here!
 

·
Semper Fi
Joined
·
483 Posts
Why isn't the blue color an option anymore? Definately going to pick one of these up as soon as my warranty expires and then powdercoat it in purple or blue.
 

·
Banned
Joined
·
39 Posts
Discussion Starter · #11 ·
I wouldn't suggest using one these pulleys on the crankshaft pully, because it can damage the engine. D your homework :)

I have written a great deal on this topic, you can read the link bellow for a discussion of these pulleys on the K20 Civic Si...
http://www.8thcivic.com/forums/bolt...hensive-thread-nst-nonstoptuning-pulleys.html


This one deserves an entire book, but here goes...

Q. Will NST Pulleys lead to premature engine failure?

I cover this topic at least several times a month but I don't mind, I understand that your cars are a very large investment for all of you and I prefer that you be intelligent and informed about all your modifications. So here we go again... Please take a few minutes to read everything I have posted here, as I worked hard on trying to give you a good explanation on the topic...

In the past many engines were externally balanced. There was an external balancer attached to the outside of the engine, on the crank snout, used to balance the engine externally. The crank pulley in such engines would then be attached to this balancer. Removal of this balancer is a bad idea. These balancers were most often used on large (6 to 8) V shaped engines of the domestic muscle car era.

Take a look at any modern (1980s and beyond) Honda, Toyota, Nissan, or other japanese inline 4 and you will find no such balancer. These engines are all internally balanced, and this process has improved even further since the late 1990s. So the topic of a BALANCER does not apply here.

What you will find on many modern engines is a harmonic damper. This is a small rubber band, litterally less than 2mm, less than 1/8th of an inch, thick that is built into the crank pulley. OEM crank pulleys are often called DAMPERS. Try placing an order for a crank pulley at your dealer and your invoice will read damper. This rubber is used to absorb something called NVH, noise/vibration/harshness. Suffice it to say, this rubber is actually not very good at performing its intended purpose after as little as a few thousand miles. What happens to rubber after a couple years of humidity, weather, snow, rain, etc? It often becomes brittle, hard, and crunchy. Can something with these properties actually absorb vibrations very well?

Many many NST customers, including people on your own forums, have reported smoother running engines with NST pulleys. Especially at idle. How is this possible if the rubber is such a vital and super important piece??? Perhaps the rubber is not as important as it is cracked up to be???


Furthermore....


On the topic of the rubber damper, engine vibrations, or possible threats resulting from elimination of this rubber piece...

On a relatively understressed near stock motor with bolt ons or low amounts of boost like what most of the people on this forum probably run, a solid pulley will not have any life threatening consiquences. The factory pulley with a 2mm (less than a 1/8th inch) damper is primarily there for wide band NVH (noise vibration harshness) supression from the engine and driveline. Removing the damper and replacing it with a solid pulley may lead to minor addtional NVH but will not harm the engine. In fact, most people claim their engines seem to run smoother with NST pulleys.

The engineering reasons are that most modern engines have a short, strong crank with, a relatively high natural frequency. The dangerous second harmonic that can cause damage occurs at an rpm that this sort of engine will never see, in the area above 10,000 rpm. Even the stock damper is not tuned for attinuation at this sort of rpm so the argument is somewhat of a moot point.

Now weak engines that are pushing the limit with LOTS of revs, wimpy cranks, super long strokes, lots of boost and dwelling in the upper rpm ranges for long periods of time can benefit from a damper designed to deal with this sort of operation but our engine is not like this, and probably very few people with this motor on this forum push the envelope that hard. How many 2.0 Liter, 500HP, 12,000RPM motors do we have on these forums?

As far as I can tell, our engine has a strong and stiff bottom end that is well built for our intended use. It has an internaly balanced crankshaft which is less like to break due to torsional vibration.

There are a lot of Honda, Toyota, and Nissan guys who use underdrive crank pulleys in road racing series like NASA or SCCA. Road racing is much more punishing on an engine than other motorsports. The engine is subjected to run times lasting roughly 30 minutes with the engine always in the upper ranges of its rpm limit. One race weekend is the equivlent of hundreds of 1/4 mile passes. These guys would not use NST pulleys if they were not reliable.

NST sponsors the first ever wheel to wheel Scion tC NASA Road Race car. The same car is also very competitive in the Grand Am series and has factory backing from Toyota, Scion, and TRD. This car has been using pulleys from NST with great results since day one.

NST has sponsored several drift cars participating in the professional US drift series, Fromula Drift. Several of our cars have also competed in the NOPI Drift series. To make things better, NST products are also used in autocross, time attack, and drag cars. These cars have been using NST pulleys with no issues of any kind for the past few seasons.

We could go on and on...

Is a solid crank pulley harmless to all engines? No it is not. As I said... small, super high reving engines, when modified way past the simple bolt on stages may have problems. These engines reach critcal harmonics, past the 10,000 rpm range, an rpm only reached by certain RACE engines.

A mildly modded inline six will most likely be fine but one subjected to high rpm for long periods of time (90% of its life) with lots of boost will probably suffer. In this case , the stock balancer/damper is probably not adequate either.

Some of the older american V8 engines are externaly balanced and it is critical not to use a solid hub pulley not designed for these applications, or damage to the engine could result. You will not find solid NST pulleys on our website for such engines.

Our engines and most around here do not fall into the above catagories. Rest assured that your engines will not blow up and die or have a reduced life in street and even racing use with these parts.

I would bet that every "expert" that tells you otherwise has little personal, practical, real world experience with the subject; as it applies in your case.

Again, I understand that your cars are a very large investment and that you depend on them as your daily means of transportation, so I do not take your questions personally. But please remember... No NST product is designed to cause you any harm or grief. We are not in business to sell junk. PERIOD.
 

·
Banned
Joined
·
39 Posts
Discussion Starter · #12 ·

·
Banned
Joined
·
39 Posts
Discussion Starter · #13 ·
What is the crank pulley size. I want a bigger crank pulley.

Thank you for your interest in our site and products, we appreciate it.

Our Underdrive Crank Pulley is smaller than the OEM pulley, and we do not offer any larger pulleys at the moment. We can however, build custom pulleys and can build a larger crank pulley for you if you are looking to raise boost from a supercharged setup :idea:

Please give us a call if interested... 281-917-0221.

:)
 

·
Banned
Joined
·
39 Posts
Discussion Starter · #14 ·
Why isn't the blue color an option anymore? Definately going to pick one of these up as soon as my warranty expires and then powdercoat it in purple or blue.

Unfortunately blue is no longer an NST color. We currently offer red and graphite gray pulleys.

Thanks again!
 

·
Evan
Joined
·
1,090 Posts
have u thought about making a PS pulely for the TSX...those would be nice casue u can actually see that pulley...lol.
 

·
Evan
Joined
·
1,090 Posts

·
Registered
Joined
·
169 Posts
^^ Would that be the same size? I currently have the crank and alternator pulley installed... love it...
 

·
Aloha Army
Joined
·
11,711 Posts
Thank you for your interest in our site and products, we appreciate it.

Our Underdrive Crank Pulley is smaller than the OEM pulley, and we do not offer any larger pulleys at the moment. We can however, build custom pulleys and can build a larger crank pulley for you if you are looking to raise boost from a supercharged setup :idea:

Please give us a call if interested... 281-917-0221.

:)
I will definitely be in touch in the near future.:idea:
 
1 - 20 of 57 Posts
Top