Acura TSX Forum banner

Possible to perform color cutoff mod without opening headlights?

3K views 5 replies 6 participants last post by  EdmTSX 
#1 ·
So i want to perform the color mod with washers, where you add washers to the projectors to have a blue/violet cutoff. is it possible to do this without baking the headlight? like remove the projector through the bulb opening??



edit: it does not go through... baking is necessary
 
#6 ·
I had the color mod, got rid of it after I got a new set of JDM headlights. It was nice to have but I wanted my sharp cut off back. You will need the right length screws if you have 2 washers in there, and make sure you don't tighten to the screws too much since the inside of the housing where you screw in the projectors is very fragile.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top