Acura TSX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter · #1 ·
Hey guys, I just purchased a Skunk2 Full cat back system, and im trying to get the bolts from the catilyic coverter and the left muffler out from the old one, but they won't come loose. i used Sea-foam deep creep penatration spray, but the bolts still won't come loose. Should I just take it to a shop, or is there a certain tool I need to use?

Thanks.
 

·
Registered
Joined
·
1,666 Posts
A bigger wrench lol. Your not the first or last that will curse those bolts. It's pretty common to have problems with those bolts. Penetrating lube is your friend. Never used the seafoam, might want to try pb blaster first before you take it to the shop.
 

·
Registered
Joined
·
340 Posts
How high do you have it jacked up? If its not that high you won't be able to stick a breaker bar in there. The best advantage to have is leverage and a torque to twist a nut off. Unless you have a hookup with a lift I would suggest to take it to a shop.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top