Acura TSX Forum banner

Rear Control Arm Stud Bolt

1278 Views 5 Replies 4 Participants Last post by  Pson
Im hoping someone can point me in the right direction or help me find a part number. I was doing the Ingalls Camber Kit install and i damaged one of the bolts. Its a stud that comes out of the rear knuckle that the rear control arm slides onto. Looks alot like a wheel stud. I can possibly clean up the threads but just incase i cant i want to be able to order one. i cant seem to find it on any diagrams.
1 - 6 of 6 Posts
It may be on the oem acura site, and there are diagrams, I'd help look but I don't have weeks to scroll though pages.

Kindest Regards,
Go to acuraoemparts.com I know the number 18,19,and 29 are for the chamber bolts on that diagram but check out the site good luck
I had a post on this and depending on where you live.....removing that bolt is the hardest thing I ever did. Had to torch it out myself at the dealership.
if you do re thread stud on rear knuckle when you put back together use anti seize grease.
if you do re thread stud on rear knuckle when you put back together use anti seize grease.
I actually got all new hardware from the dealer and a tub of the anti-seize.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top