Acura TSX Forum banner
1 - 20 of 67 Posts

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #1 ·
Well I've been asked what I want for a birthday present, and I want fog lights.

PasswordJDM doesn't make them anymore. So there's that, and I don't want to buy them from Acura because thats toooo much.

So I have a few versions from eBay that I would love some insight one. I know it's been talked over before, but every time I check eBay their something new.

Here they are:
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem200259725561QQitemZ200259725561
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem120313412598QQitemZ120313412598
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem400001492228QQitemZ400001492228
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem260295198870QQitemZ260295198870
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem200260893770QQitemZ200260893770
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem280275392172QQitemZ280275392172
http://cgi.ebay.com/ebaymotors/03-0...m14QQhashZitem380070632631QQitemZ380070632631

Thanks for the help guys. I know the main issue will be the fitment of the switch, if anything I'll get a toggle one from Autozone or something.

I'm not sure if I want yellow or the clear ones yet. Still debating.

Thanks
 

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #2 · (Edited)
.
 

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #4 ·
I hear ya, but thats spending more then I want to.
 

·
Un-Civil Engineer
Joined
·
2,205 Posts
I bought mine from imotorsport as well. I have had no problems so far. I do have a couple of comments:

When I purchased mine, the auction listing stated that no modifications were required, but I had to cut off a few useless connectors to make it work, and extend a few ground wires.

The current auction states that the lights are SAE and DOT approved, whereas the product that I received was not DOT approved. It probably doesn't matter, but its different from what the packaging states.
 

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #9 ·
thanx CL9!
 

·
Registered
Joined
·
379 Posts
fogs

Password JDM Has the pure yellow fig light kits back in stock. Also i believe excelerate may have one kit left in stock. I just got mine and put them on. Love them nice pure JDM Look.
 

·
MattCass
Joined
·
36 Posts

·
whatever
Joined
·
2,894 Posts
I would like to know if the button fits in the hole next to VSA button.
Post some pics after and during the install if you can :D
Thanks
 

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #15 ·
I'm going to do the PasswordJDM ones. I bought it on Monday and hoping to get them in on Friday or Saturday. I'm going to try and do a DIY.
 

·
got some new shoes :)
Joined
·
3,491 Posts
i bought from imotorsport today and cant wait for them to come in
 

·
whatever
Joined
·
2,894 Posts
i need some wiring and switch that looks like the factory VSA button to wire to the kenstyle fogs.... let me know the fitment on the switch of the ebay fogs :D thanks
 

·
Registered
Joined
·
492 Posts
I'd trust Marcus/Heeltoe more than the eBay guys. I bought a pair of eBay JDM fog lights for my friend last week for his RSX and when my mechanic went to install them, they didn't fit well and the fog light switch didn't fit either. I had to sand down the fog light switch for him in order to get it to actually fit in the slot.

Then again, 2 years ago I bought an aftermarket fog light kit on eBay for my EG hatch and everything fit perfectly.

So... results will vary as many people will know, but if there was an actual trusted vendor who sells this stuff I'd go with them over eBay, in the end less headaches.
 

·
, Moderator Emeritus
Joined
·
2,851 Posts
Discussion Starter · #20 ·
Im still just waiting for the shipping from heeltoe, I can't wait.
 
1 - 20 of 67 Posts
Top