Acura TSX Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter #1
I have new rims gettting refinished specs are
18x7.5 +45 offset. do i need spacers to make it sit flush or is +45 a good enough offset. camber settings are factory spec?

ill be posting pics of the rims soon
 

·
" It Is What It Is "
Joined
·
7,490 Posts
You can go with 5mm spacers anything after that you will either have to get an adapter or get longer studs...
 

·
Registered
Joined
·
107 Posts
Discussion Starter #3
here!

i put them on they look good without spacers. I havent washed my car and its missing centercaps so not too bad!






 

·
Registered
Joined
·
107 Posts
Discussion Starter #5
these are daily driver rims. Im saving a pair for some 18x9's or some 19's
so +30 offset is closest to the fender wall?
 

·
My car whines
Joined
·
637 Posts
i have 18x8 +35 and the rear is not quite flush but the front is. a 5mm spacer would probably do the trick to be completely flush in the rear.
 

·
Registered
Joined
·
108 Posts
Mine is the same as Raigen18, 18x8 35+, I am super happy with that set up.
I agree if u want to put 5mm spacer might do the trick for the rear.
 
1 - 11 of 11 Posts
Top